DIN, WNr 3.3547 Plate, Sheet, Coil, Strip, Block Supplier & Exporter

Aluminium Alloy 3.3547 - O, H111, H19 Plate, Sheet, Coil, Strip, Block

Tradeobiz Pvt Ltd leading Aluminium Alloy DIN 3.3547, Werkstoff 3.3547 Plate & Sheet (Temper- O, F, H111, H112, H116, H12, H14, H16, H22, H24, H26, H32, H321, H34, H36) supplier, exporter, trader, wholesaler, stockiest, retailer, stock holder, distributor, dealer.

Aluminium alloy 3.3547 is known for exceptional performance in extreme environments. Aluminium 3.3547 is highly resistant to attack by both seawater and industrial chemical environments..

Thickness for 3.3547 Aluminium Alloy Plate, Sheet, Coil: 1.25mm upto 150mm

Width for 3.3547 Aluminium Alloy Plate, Sheet, Coil: 100mm to 1500mm

Length for 3.3547 Aluminium Alloy Plate, Sheet, Coil: 100mm to 3000mm

Thickness for Aluminium Alloy 3.3547 Strip, Block, Patta, Patti: 1.25mm to 150mm

Width for Aluminium Alloy 3.3547 Strip, Block, Patta, Patti: 25mm to 1500mm

Length for Aluminium Alloy 3.3547 Strip, Block, Patta, Patti: 100mm to 3000mm(Can be Customized)

Aluminium Alloy 3.3547 Plate & Sheet chemical composition / chemistry:

Fe

Si

Mn

Cr

Ti

Cu

Mg

Zn

Others

max 0.7

0.5 – 1.2

0.4 – 1.2

max 0.1

max 0.15

3.9 – 5

0.2 – 0.8

max 0.25

each 0.05; total 0.15

Al – Rem

Applications of Aluminium Alloy 3.3547 Plate & Sheet are Shipbuilding, Railroad cars, Drilling rigs, Coachwork, Pressure vessels, Aluminum armor, Vehicle bodies, Tip truck bodies, Mine skips and cages.

Client can procure smaller quantities of Aluminium Alloy 3.3547 Plate & Sheet online ready stock from us at premium prices / cost in any destination by just sending us an email at sales@tradeobiz.com

Other Possible products in Aluminium Alloy EN AW-3.3547 are mentioned below:

3.3547 Aluminium Bar
3.3547 Aluminium Round Bar
3.3547 Aluminium Flat Bar
3.3547 Aluminium Square Bar
3.3547 Aluminium Round Corner Square Bar
3.3547 Aluminium RCS Bar
3.3547 Aluminium Straight Corner Square Bar
3.3547 Aluminium SCS Bar
3.3547 Aluminium Hexagonal Bar
3.3547 Aluminium Hollow Bar
3.3547 Aluminium Hex Bar
3.3547 Aluminium Forged Bar
3.3547 Aluminium Rolled Bar
3.3547 Aluminium Bright Bar
3.3547 Aluminium Machined Bar (Proof Machined)
3.3547 Aluminium Tempered Bar
3.3547 Aluminium Blocks (Square, Rectangular)
3.3547 Aluminium Shafting (Shafts)
3.3547 Aluminium Plate
3.3547 Aluminium Sheet
3.3547 Aluminium Coil
3.3547 Aluminium Circle
3.3547 Aluminium Strip
3.3547 Aluminium Ring (Seamless, Welded, Forged, Rolled)
3.3547 Aluminium Forged Ring (Seamless, Welded)
3.3547 Aluminium Rolled Ring (Seamless, Welded)
3.3547 Aluminium Seamless Ring (Forged, Rolled)
3.3547 Aluminium Welded Ring (Forged, Rolled)
3.3547 Aluminium Tube (Seamless, Welded)
3.3547 Aluminium Tubing (Seamless, Welded)
3.3547 Aluminium Pipe (Seamless, Welded)
3.3547 Aluminium Flange
3.3547 Aluminium Fitting
3.3547 Aluminium Bushing
3.3547 Aluminium Fasteners
3.3547 Aluminium Stud
3.3547 Aluminium Bolt
3.3547 Aluminium Screws
3.3547 Aluminium Nut
3.3547 Aluminium Washer
3.3547 Aluminium Forgings
3.3547 Aluminium Machined Part
3.3547 Aluminium Welded Components
3.3547 Aluminium Welding Consumables
3.3547 Aluminium Filler Metal Wire Rod
3.3547 Aluminium Rods
3.3547 Aluminium Shims (Shim-Sheets)
3.3547 Aluminium Wires

Tradeobiz Pvt Ltd looking to explore its supply of Aluminium Alloy ENAW-3.3547 Plate & Sheet (Temper- O, F, H111, H112, H116, H12, H14, H16, H22, H24, H26, H32, H321, H34, H36) from associated manufacturer to Albania, Algeria, American Samoa, Andorra, Angola, Anguilla, Antarctica, Antigua and Barbuda, Argentina, Armenia, Aruba, Australia, Austria, Azerbaijan, Bahamas, Bahrain, Bangladesh, Barbados, Belarus, Belgium, Belize, Benin, Bermuda, Bhutan, Bolivia, Bonaire, Bosnia and Herzegovina, Botswana, Bouvet Island, Brazil, Brunei Darussalam, Bulgaria, Burkina Faso, Burundi, Cambodia, Cameroon, Canada, Cape Verde, Cayman Islands, Central African Republic, Chad, Chile, China, Christmas Island,  Cocos (Keeling) Islands, Colombia, Comoros, Congo, Cook Islands, Costa Rica, Côte d’Ivoire, Croatia, Cuba, Curaçao, Cyprus, Czech Republic, Denmark, Djibouti, Dominica, Dominican Republic, Ecuador, Egypt, El Salvador, Equatorial Guinea, Eritrea, Estonia, Ethiopia, Falkland Islands (Malvinas), Faroe Islands, Fiji, Finland, France, French Guiana, French Polynesia, French Southern Territories, Gabon, Gambia, Georgia, Germany, Ghana, Gibraltar, Greece, Greenland, Grenada, Guadeloupe, Guam, Guatemala, Guernsey, Guinea, Guinea-Bissau, Guyana, Haiti, Heard Island and McDonald Islands, Holy See (Vatican City State), Honduras, Hong Kong, Hungary, Iceland, India, Indonesia, Iran, Tehran, Iraq, Ireland, Isle of Man, Israel, Italy, Jamaica, Japan, Jersey, Jordan, Kazakhstan, Kenya, Kiribati, South Korea, Kuwait, Kyrgyzstan, Lao, Latvia,  Lesotho, Liberia, Libya, Liechtenstein, Lithuania, Luxembourg, Macao, Macedonia, Madagascar, Malawi, Malaysia, Maldives, Mali, Malta, Marshall Islands, Martinique, Mauritania, Mauritius, Mayotte, Mexico, Micronesia, Moldova, Monaco, Mongolia, Montenegro, Montserrat, Morocco, Mozambique, Myanmar, Namibia, Nauru, Nepal, Netherlands, New Caledonia, New Zealand, Nicaragua, Niger, Nigeria, Niue, Norfolk Island, Northern Mariana Islands, Norway, Oman, Palau, Palestinian Territory, Panama, Papua New Guinea, Paraguay, Peru, Philippines, Pitcairn, Poland, Portugal, Puerto Rico, Qatar, Doha,  Réunion, Romania, Russian Federation, Rwanda, Saint Barthélemy, Saint Helena, Saint Kitts and Nevis, Saint Lucia, Saint Martin (French part), Saint Pierre and Miquelon, Saint Vincent and the Grenadines, Samoa, San Marino, Sao Tome and Principe, Saudi Arabia, Senegal, Serbia, Seychelles, Sierra Leone, Singapore, Sint Maarten (Dutch part), Slovakia, Slovenia, Solomon Islands, Somalia, South Africa, South Georgia and the South Sandwich Islands, South Sudan, Spain, Sri Lanka, Sudan, Suriname, Svalbard and Jan Mayen, Swaziland, Sweden, Switzerland, Syrian Arab Republic, Tajikistan, Tanzania, Thailand, Timor-Leste, Togo, Tokelau, Tonga, Trinidad and Tobago, Tunisia, Turkey, Turkmenistan, Turks and Caicos Islands, Tuvalu, Uganda, Ukraine, United Arab Emirates, UAE, United Kingdom, UK, United States, USA, Uruguay, Uzbekistan, Vanuatu, Venezuela, Viet Nam, Virgin Islands, U.S., Wallis and Futuna, Western Sahara, Yemen, Zambia, Zimbabwe, Delhi, Kolkata, Chennai, Bangalore, Hyderabad, Ahmedabad, Pune, Surat, Jaipur, Kanpur, Lucknow, Nagpur, Ghaziabad, Indore, Coimbatore, Kochi, Patna, Kozhikode, Bhopal, Thrissur, Vadodara, Agra, Visakhapatnam, Malappuram, Thiruvananthapuram, Kannur, Ludhiana, Nashik, Vijayawada, Madurai, Varanasi, Meerut, Faridabad, Rajkot, Jamshedpur, Jabalpur, Srinagar, Asansol, Vasai-Virar, Allahabad, Dhanbad, Aurangabad, Amritsar, Jodhpur, Raipur, Ranchi, Gwalior, Kollam, Durg-Bhilainagar, Chandigarh, Tiruchirappalli, Kota, Andhra Pradesh, Arunachal Pradesh, Assam, Bihar, Chhattisgarh, Goa, Gujarat, Haryana, Himachal Pradesh, Jammu and Kashmir, Jharkhand, Karnataka, Kerala, Madhya Pradesh, Maharashtra, Manipur, Meghalaya, Mizoram, Nagaland, Odisha, Punjab, Rajasthan, Sikkim, Tamil Nadu, Telangana, Tripura, Uttar Pradesh, Uttarakhand, West Bengal, Andaman and Nicobar Islands, Dadra and Nagar Haveli, Daman and Diu, Lakshadweep, Puducherry, etc.

  • Details on EN ISO 4957 Standards
  • Different Grades
  • Heat Treatment
  • Different Forging Forms
  • Different Products
  • Inquiry in Details
  • Our Target Areas

    EN 10016 : 1995 steel standard has various grades of non-alloy steel, carbon steel, high carbon steel, etc. which are made from different processes and are used in various applications. These are steel standards can be avail in form of tubes, pipes, flanges, fittings, fasteners, bolts, nuts, screws, cir-clips, retaining rings, pins, threaded inserts, washer, springs, bars, rods, plate, sheet, coil, shaft, die, tools, etc. We trade in few of those EN 10016 steel grades.

    EN 10016 Heat Treatment Processes: Untreated, Age Hardened, Normalized, Annealing, Soft Annealed, Solution Annealed, Isothermal annealing, Normalized and tempered, Hardened and Tempered, Precipitation hardened, Air quenched and tempered, Liquid quenched and tempered, Treated to improve shearability, Cold drawn and stress relieved, Treated to hardness range, Warm worked, Treated to ferrite-pearlite structure and hardness range, Annealed to achieve spheroidization of the carbides, etc.

    Different Types of EN 10016 Forging: Hot Forging, Cold Forging, Warm Forging, Open-Die Forging, Electrical Upsetting, Upset Forging

    Different Types of EN 10016 Grades that we trade are as listed below:

    C4D, C10D, C7D, C20D, C18D, C48D, C32D, C50D, C58D, C62D, C68D, C70D, C72D, C78D, C82D, C2D1, C4D1, C3D2, C8D2, C12D2, C18D2, C26D2, C36D2, C40D2, C46D2, C50D2, C58D2, C62D2, C68D2, C72D2, C9D, C12D, C15D, C26D, C38D, C56D, C42D, C52D, C60D, C66D, C76D, C86D, C92D, C80D, C88D, C3D1, C5D2, C10D2, C15D2, C20D2, C32D2, C38D2, C42D2, C48D2, C52D2, C56D2, C60D2, C66D2, C70D2, C76D2, C82D2, C88D2, C98D2, 1.0300, 1.0310, 1.0313, 1.0414, 1.0416, 1.0517, 1.0530, 1.0586, 1.0609, 1.0611, 1.0613, 1.0615, 1.0617, 1.0620, 1.0626, 1.1185, 1.1188, 1.1110, 1.1113, 1.1124, 1.1129, 1.1139, 1.1145, 1.1153, 1.1162, 1.1171, 1.1212, 1.1222, 1.1232, 1.1242, 1.0304, 1.0311, 1.0413, 1.0415, 1.0516, 1.0518, 1.0541, 1.0588, 1.0610, 1.0612, 1.0614, 1.0616, 1.0618, 1.0622, 1.0628, 1.1187, 1.1111, 1.1114, 1.1126, 1.1137, 1.1143, 1.1150, 1.1154, 1.1164, 1.1202, 1.1220, 1.1228, 1.1236, 1.1251, 1.1253, 1.1262, 1.1272, 1.1283, etc.

    Different EN 10016:1995 Products: Billet, Continuous Cast Billet, Bar, Rods, Round, Flat, Square, Round Corner Square(RCS), Straight Corner Square(SCS), Rectangular, Slabs, Blocks, Hexagonal, Hollow, Concast, Forged, Rolled, Black, Bright, Peeled, Proof Machined, Shafting (Shafts), Plate, Sheet, Coil, Circle, Strip, Foil, Ring (Seamless, Welded, Forged, Rolled), Tube, Tubing, Pipe, Flange, Slip-On Flange (SO, SORF, SOFF), Weld Necking Flange (WN, WNRF, WNFF, WNRTJ), Blind Flange (BL, BLRF, BLFF, BLRTJ), Socket welding Flange (SW, SWFF, SWRF, SWRTJ), Threaded Flange (TH, THFF, THRF, THRTJ), Lap joint Flange (LJ, LJFF, LJRF), Long weld neck Flange (LWN, LWNFF, LWNRF), Spectacle Blind Flange, Plate Flange, Hub Flange, Flat Face Flange (FF), Raised Face Flange (RF), Ring Type Joint Flange (RTJ), Fitting, Buttweld Fitting, Socket weld Fitting, Threaded Fitting, Screwed Fitting, O’let Fitting, Branch Connections, Elbow (45, 90, 180 Degree, Long, Short Radius), Tee (Straight, Reducing, Equal, Unequal), Reducer (Concentric, Eccentric), Cross (Straight, Reducing), Stub In & Stub End (Long, Saddle -Wrap Around), Lateral, End Cap, Bends, Swage (Concentric, Eccentric), Coupling (Half, Full), Street Elbow, Bushing, Plug (Round, Square, Hexagon), Hammer Union, Nipple, Weldolet (Heavy Wall, Insert, Reducing, Flat), Thredolet, Threadolet, Sockolet, Couplet (Female Threaded), Elbolet, Latrolet, Nipolet, Sweepolet, Brazolet, Expanded Olet, Flanged Olet, Flexolet, Scrap, Fastener, Stud or Threaded Rod, Bolt, *****, Nut, Washer, Rivet, Circlip, Retaining Ring, Pin, Threaded Inserts, Standoffs, Spacers, Forgings, Machined Part, Welded Compenents, Welding Consumables, Filler Metal Wire Rod, Shims (Shim-Sheets), Wires, Springs, Bearings, Valve, Gasket, Filter, Silencers, Hard Chrome Plated (HCPR) Rod/Shafting, Pre-Honing, Honed, etc.

    Client can procure smaller quantities of EN 10016 standard products online ready stock from us at any destination by just sending us an email at sales@tradeobiz.com

    tradeobiz pvt ltd, India are looking to explore its supply, export of EN 10016 Steel Standard Grades from associated manufacturers to Albania, Algeria, American Samoa, Andorra, Angola, Anguilla, Antarctica, Antigua and Barbuda, Argentina, Armenia, Aruba, Australia, Austria, Azerbaijan, Bahamas, Bahrain, Bangladesh, Barbados, Belarus, Belgium, Belize, Benin, Bermuda, Bhutan, Bolivia, Bonaire, Bosnia and Herzegovina, Botswana, Bouvet Island, Brazil, Brunei Darussalam, Bulgaria, Burkina Faso, Burundi, Cambodia, Cameroon, Canada, Cape Verde, Cayman Islands, Central African Republic, Chad, Chile, China, Christmas Island, Cocos (Keeling) Islands, Colombia, Comoros, Congo, Cook Islands, Costa Rica, Côte d’Ivoire, Croatia, Cuba, Curaçao, Cyprus, Czech Republic, Denmark, Djibouti, Dominica, Dominican Republic, Ecuador, Egypt, El Salvador, Equatorial Guinea, Eritrea, Estonia, Ethiopia, Falkland Islands (Malvinas), Faroe Islands, Fiji, Finland, France, French Guiana, French Polynesia, French Southern Territories, Gabon, Gambia, Georgia, Germany, Ghana, Gibraltar, Greece, Greenland, Grenada, Guadeloupe, Guam, Guatemala, Guernsey, Guinea, Guinea-Bissau, Guyana, Haiti, Heard Island and McDonald Islands, Holy See (Vatican City State), Honduras, Hong Kong, Hungary, Iceland, India, Indonesia, Iran, Tehran, Iraq, Ireland, Isle of Man, Israel, Italy, Jamaica, Japan, Jersey, Jordan, Kazakhstan, Kenya, Kiribati, South Korea, Kuwait, Kyrgyzstan, Lao, Latvia, Lesotho, Liberia, Libya, Liechtenstein, Lithuania, Luxembourg, Macao, Macedonia, Madagascar, Malawi, Malaysia, Maldives, Mali, Malta, Marshall Islands, Martinique, Mauritania, Mauritius, Mayotte, Mexico, Micronesia, Moldova, Monaco, Mongolia, Montenegro, Montserrat, Morocco, Mozambique, Myanmar, Namibia, Nauru, Nepal, Netherlands, New Caledonia, New Zealand, Nicaragua, Niger, Nigeria, Niue, Norfolk Island, Northern Mariana Islands, Norway, Oman, Palau, Palestinian Territory, Panama, Papua New Guinea, Paraguay, Peru, Philippines, Pitcairn, Poland, Portugal, Puerto Rico, Qatar, Doha, Réunion, Romania, Russia Federation, Rwanda, Saint Barthélemy, Saint Helena, Saint Kitts and Nevis, Saint Lucia, Saint Martin (French part), Saint Pierre and Miquelon, Saint Vincent and the Grenadines, Samoa, San Marino, Sao Tome and Principe, Saudi Arabia, Senegal, Serbia, Seychelles, Sierra Leone, Singapore, Sint Maarten (Dutch part), Slovakia, Slovenia, Solomon Islands, Somalia, South Africa, South Georgia and the South Sandwich Islands, South Sudan, Spain, Sri Lanka, Sudan, Suriname, Svalbard and Jan Mayen, Swaziland, Sweden, Switzerland, Syrian Arab Republic, Tajikistan, Tanzania, Thailand, Timor-Leste, Togo, Tokelau, Tonga, Trinidad and Tobago, Tunisia, Turkey, Turkmenistan, Turks and Caicos Islands, Tuvalu, Uganda, Ukraine, United Arab Emirates, UAE, United Kingdom, UK, United States, USA, Uruguay, Uzbekistan, Vanuatu, Venezuela, Viet Nam, Virgin Islands, U.S., Wallis and Futuna, Western Sahara, Yemen, Zambia, Zimbabwe, Alabama, Alaska, Arizona, Arkansas, California, Colorado, Connecticut, District of Columbia, Florida, Georgia, Hawaii, Idaho, Illinois, Indiana, Iowa, Kansas, Kentucky, Louisiana, Maryland, Massachusetts, Michigan, Minnesota, Mississippi, Missouri, Montana, Nebraska, Nevada, New Hampshire, New Jersey, New Mexico, New York, North Carolina, North Dakota, Ohio, Oklahoma, Oregon, Pennsylvania, Rhode Island, South Carolina, South Dakota, Tennessee, Texas, Utah, Virginia, Washington, Wisconsin, Abilene, Akron, Albuquerque, Alexandria, Allen, Allentown, Amarillo, Anaheim, Anchorage, Ann Arbor, Antioch, Arlington, Arvada, Athens, Atlanta, Augusta, Aurora, Aurora, Austin, Bakersfield, Baltimore, Baton Rouge, Beaumont, Bellevue, Bend, Berkeley, Billings, Birmingham, Boise, Boston, Boulder, Bridgeport, Broken Arrow, Brownsville, Buffalo, Burbank, Cambridge, Cape Coral, Carlsbad, Carmel, Carrollton, Cary, Cedar Rapids, Centennial, Chandler, Charleston, Charlotte, Chattanooga, Chesapeake, Chicago, Chico, Chula Vista, Cincinnati, Clarksville, Clearwater, Cleveland, Clovis, College Station, Colorado Springs, Columbia, Columbus, Concord, Coral Springs, Corona, Corpus Christi, Costa Mesa, Dallas, Daly City, Davenport, Davie, Dayton, Denton, Denver, Des Moines, Detroit, Downey, Durham, Edinburg, El Cajon, El Monte, El Paso, Elgin, Elizabeth, Elk Grove, Escondido, Eugene, Evansville, Everett, Fairfield, Fargo, Fayetteville, Fontana, Fort Collins, Fort Lauderdale, Fort Wayne, Fort Worth, Fremont, Fresno, Frisco, Fullerton, Gainesville, Garden Grove, Garland, Gilbert, Glendale, Glendale, Grand Prairie, Grand Rapids, Greeley, Green Bay, Greensboro, Gresham, Hampton, Hartford, Hayward, Henderson, Hialeah, High Point, Hillsboro, Hollywood, Honolulu, Houston, Huntington Beach, Huntsville, Independence, Indianapolis, Inglewood, Irvine, Irving, Jackson, Jacksonville, Jersey City, Joliet, Jurupa Valley, Kansas City, Kansas City, Kent, Killeen, Knoxville, Lafayette, Lakeland, Lakewood, Lancaster, Lansing, Laredo, Las Cruces, Las Vegas, League City, Lee’s Summit, Lewisville, Lexington, Lincoln, Little Rock, Long Beach, Los Angeles, Louisville, Lowell, Lubbock, Macon, Madison, Manchester, McAllen, McKinney, Memphis, Meridian, Mesa, Mesquite, Miami, Miami Gardens, Midland, Milwaukee, Minneapolis, Miramar, Mobile, Modesto, Montgomery, Moreno Valley, Murfreesboro, Murrieta, Nampa, Naperville, Nashville, New Haven, New Orleans, Newark, Newport News, Norfolk, Norman, North Charleston, North Las Vegas, Norwalk, Oakland, Oceanside, Odessa, Olathe, Omaha, Ontario, Orange, Orlando, Overland Park, Oxnard, Palm Bay, Palmdale, Pasadena, Paterson, Pearland, Pembroke Pines, Peoria, Philadelphia, Phoenix, Pittsburgh, Plano, Pomona, Pompano Beach, Port St. Lucie, Portland, Providence, Provo, Pueblo, Raleigh, Rancho Cucamonga, Reno, Renton, Rialto, Richardson, Richmond, Riverside, Rochester, Rockford, Roseville, Round Rock, Sacramento, Saint Paul, Salem, Salinas, Salt Lake City, San Angelo, San Antonio, San Bernardino, San Diego, San Francisco, San Jose, San Mateo, Sandy Springs, Santa Ana, Santa Clara, Santa Clarita, Santa Maria, Santa Rosa, Savannah, Scottsdale, Seattle, Shreveport, Simi Valley, Sioux Falls, South Bend, South Fulton, Sparks, Spokane Valley, Springfield, St. Louis, St. Petersburg, Stamford, Sterling Heights, Stockton, Sugar Land, Sunnyvale, Surprise, Syracuse, Tacoma, Tallahassee, Tampa, Temecula, Tempe, Thornton, Thousand Oaks, Toledo, Topeka, Torrance, Tucson, Tulsa, Tuscaloosa, Tyler, Vacaville, Vallejo, Vancouver, Ventura, Victorville, Virginia Beach, Visalia, Vista, Waco, Warren, Washington, Waterbury, West Covina, West Jordan, West Palm Beach, West Valley City, Westminster, Wichita Falls, Wilmington, Winston–Salem, Worcester, Yonkers, etc.