How to Choose the Right Heavy Duty Hose Clamp for Your Application
You have already decided the joint needs more than a standard worm gear clamp. Maybe it keeps seeping cold, maybe...
18
Oct
Blog
18
Oct
How to Choose the Right V-Band Clamp for Your Application
A V-band clamp that "should fit" but leaks almost always has the same story behind it. Someone ordered by the pip...
17
Oct
How to Choose the Right German Type Hose Clamp for Your Application
Most people who search for a German type hose clamp already know roughly what they want: a worm drive clamp with ...
17
Oct
How to Choose Hose Clamps for Chemical Transfer Hoses
A coolant leak makes a puddle. A chemical leak can burn skin, blind an operator, release toxic vapour or eat thro...
17
Oct
How Tight Should a Hose Clamp Be?
Ask ten mechanics how tight should a hose clamp be and most will say "until it feels right." Honest, but no help ...
17
Oct
Hose Clamp Size Chart in mm and Inches
This hose clamp size chart puts the whole OneTouch Exim catalogue on one page, in inches and in millimetres, so y...
17
Oct
Heavy Duty vs Standard Hose Clamps: When to Upgrade
You replaced the clamp in March. It leaked again in May, so you replaced it again, a little tighter this time. No...
17
Oct
How to Choose the Right Exhaust Clamp for Your Application
Most exhaust leaks that come back after a "fix" share one cause: the clamp was picked by pipe size alone, and nob...
17
Oct
How to Choose the Right Double Wire Hose Clamp for Your Application
Walk into any farm shed, pond supply shop or woodworking store and you will find a box of double wire hose clamps...
17
Oct
How to Choose the Right Double Ear Clamp for Your Application
A double ear clamp is the small steel band with two raised loops that you see on air hose barbs, fuel lines on sm...