Gates 32044 Cross Reference

Looking for Gates aftermarket 32044? It cross-references to OneTouch part OTX-4SC0044 – Hose Clamp 2.31 in to 3.25 in. Same size, same fit, supplied in single units or export cartons.

OTX-4SC0044 specifications (replaces Gates 32044)

Clamp Type	Worm Gear Hose Clamp
Application	Coolant, Fuel & Air Hoses
Clamping Range	2-5/16 in to 3-1/4 in (59–83 mm)
Hex Size	5/16 in
Torque Rating	45 in-lbs
SAE	44
Band Width	1/2 in
Band Material	301 Stainless Steel
Screw	Zinc Plated Carbon Steel | 5/16 in hex
OEM Manufacturer	IHC
Sold As	Each

Where the Gates 32044 clamp is used

Worm gear hose clamps are the everyday fix for coolant, fuel, air and vacuum hoses. They tighten with a screwdriver or nut driver and can be reused. OTX-4SC0044 is used on coolant, fuel & air hoses.

Other part numbers that match OTX-4SC0044

8 more OEM and aftermarket numbers cross to the same clamp. Any of them can be ordered as OTX-4SC0044.

Ordering OTX-4SC0044

Ask for a quote with the number 32044 or OTX-4SC0044, plus your quantity. Small orders and full export cartons are both welcome, and we reply within 24 hours.

Questions about this number

Is OTX-4SC0044 the same as Gates 32044?

Yes. OTX-4SC0044 matches Gates 32044: clamping range 2-5/16 in to 3-1/4 in (59–83 mm), band width 1/2 in. If the hose has been changed since the old clamp was fitted, measure the hose outside diameter before ordering.

What size is the Gates 32044 clamp?

Gates 32044 fits 2-5/16 in to 3-1/4 in (59–83 mm). The band is 301 Stainless Steel.