Fairview HC6-88 Cross Reference

Looking for Fairview aftermarket HC6-88? It cross-references to OneTouch part OTX-4SC0088 – Hose Clamp 5.265 in to 6.00 in. Same size, same fit, supplied in single units or export cartons.

OTX-4SC0088 specifications (replaces Fairview HC6-88)

Clamp Type	Worm Gear Hose Clamp
Application	Coolant, Fuel & Air Hoses
Clamping Range	3-1/8 in to 6 in (79–152 mm)
Hex Size	5/16 in
Torque Rating	45 in-lbs
SAE	88
Band Width	1/2 in
Band Material	301 Stainless Steel
Screw	Zinc Plated Carbon Steel | 5/16 in hex
Sold As	Each

Where the Fairview HC6-88 clamp is used

Worm gear hose clamps are the everyday fix for coolant, fuel, air and vacuum hoses. They tighten with a screwdriver or nut driver and can be reused. OTX-4SC0088 is used on coolant, fuel & air hoses.

Other part numbers that match OTX-4SC0088

14 more OEM and aftermarket numbers cross to the same clamp. Any of them can be ordered as OTX-4SC0088.

Ordering OTX-4SC0088

Ask for a quote with the number HC6-88 or OTX-4SC0088, plus your quantity. Small orders and full export cartons are both welcome, and we reply within 24 hours.

Questions about this number

Is OTX-4SC0088 the same as Fairview HC6-88?

Yes. OTX-4SC0088 matches Fairview HC6-88: clamping range 3-1/8 in to 6 in (79–152 mm), band width 1/2 in. If the hose has been changed since the old clamp was fitted, measure the hose outside diameter before ordering.

What size is the Fairview HC6-88 clamp?

Fairview HC6-88 fits 3-1/8 in to 6 in (79–152 mm). The band is 301 Stainless Steel.