Sterling H116MS Cross Reference
Looking for Sterling OEM H116MS? It cross-references to OneTouch part OTE-4SS0016 – Hose Clamp Stainless Steel All 0.81 in to 1.50 in. Same size, same fit, supplied in single units or export cartons.
OneTouch replacement
Hose Clamp Stainless Steel All 0.81 in to 1.50 in
Part No. OTE-4SS0016
- Clamping Range 13/16 in to 1-1/2 in (21–38 mm)
- Band Width 1/2 in
- Band Material 301 Stainless Steel
OTE-4SS0016 specifications (replaces Sterling H116MS)
| Clamp Type | Worm Gear Hose Clamp |
| Application | Coolant, Fuel & Air Hoses |
| Clamping Range | 13/16 in to 1-1/2 in (21–38 mm) |
| Hex Size | 5/16 in |
| Torque Rating | 45 in-lbs |
| SAE | 16 |
| Band Width | 1/2 in |
| Band Material | 301 Stainless Steel |
| Screw | 410 Stainless Steel | 5/16 in hex |
| OEM Manufacturer | Sterling |
| Sold As | Each |
Where the Sterling H116MS clamp is used
Worm gear hose clamps are the everyday fix for coolant, fuel, air and vacuum hoses. They tighten with a screwdriver or nut driver and can be reused. OTE-4SS0016 is used on coolant, fuel & air hoses.
Other part numbers that match OTE-4SS0016
24 more OEM and aftermarket numbers cross to the same clamp. Any of them can be ordered as OTE-4SS0016.
| Name | Part Number | Type |
|---|---|---|
| Acdelco | 32216C | Aftermarket |
| Aero-Seal | 20016 | Aftermarket |
| Amgauge | CC16 | Aftermarket |
| Automann | 561.22016 | Aftermarket |
| Automann | 56122016 | Aftermarket |
| Breeze | 64016H | Aftermarket |
| Dayco | 92016 | Aftermarket |
| Dayco | K16S | Aftermarket |
| Excoh | 4SS0016 | Aftermarket |
| Gates | 32216 | Aftermarket |
| Goodyear | 51316 | Aftermarket |
| Ideal | 6816 | Aftermarket |
| Ideal | 6816590 | Aftermarket |
| Ideal | 630040016 | Aftermarket |
| Ideal | 630040016051 | Aftermarket |
| Murray | H20SS00C | Aftermarket |
| Norma | 0361 0116 030 | Aftermarket |
| Norma | 3610116030 | Aftermarket |
| Norma | 03610116030 | Aftermarket |
| Norton | 033-16 | Aftermarket |
| Norton | 03316 | Aftermarket |
| Sterling | H116MS | OEM |
| Sure-Tite | 16HS | Aftermarket |
| Sure-Tite | C16PS | Aftermarket |
| Tramec Sloan | 491716 | Aftermarket |
Ordering OTE-4SS0016
Ask for a quote with the number H116MS or OTE-4SS0016, plus your quantity. Small orders and full export cartons are both welcome, and we reply within 24 hours.
Questions about this number
Is OTE-4SS0016 the same as Sterling H116MS?
Yes. OTE-4SS0016 matches Sterling H116MS: clamping range 13/16 in to 1-1/2 in (21–38 mm), band width 1/2 in. If the hose has been changed since the old clamp was fitted, measure the hose outside diameter before ordering.
What size is the Sterling H116MS clamp?
Sterling H116MS fits 13/16 in to 1-1/2 in (21–38 mm). The band is 301 Stainless Steel.