Breeze CT 250 L Cross Reference

Looking for Breeze aftermarket CT 250 L? It cross-references to OneTouch part OTX-4CT250L – Constant Torque Clamp HD 1.75 in to 2.63 in. Same size, same fit, supplied in single units or export cartons.

OTX-4CT250L specifications (replaces Breeze CT 250 L)

Clamp Type	Heavy-Duty Constant Torque Clamp
Application	Coolant & Heater Hoses
Clamping Range	1-3/4 in to 2-5/8 in (44–67 mm)
Hex Size	3/8 in
Torque Rating	92 in-lbs
SAE	262
Band Width	5/8 in
Band Material	301 Stainless Steel
Screw	Zinc Plated Carbon Steel | 3/8 in hex
Sold As	Each

Where the Breeze CT 250 L clamp is used

Constant torque clamps have a spring washer stack that keeps the clamp tight as the hose expands when hot and shrinks when cold, so coolant and heater lines do not seep after a cold start. OTX-4CT250L is used on coolant & heater hoses.

Other part numbers that match OTX-4CT250L

5 more OEM and aftermarket numbers cross to the same clamp. Any of them can be ordered as OTX-4CT250L.

Ordering OTX-4CT250L

Ask for a quote with the number CT 250 L or OTX-4CT250L, plus your quantity. Small orders and full export cartons are both welcome, and we reply within 24 hours.

Questions about this number

Is OTX-4CT250L the same as Breeze CT 250 L?

Yes. OTX-4CT250L matches Breeze CT 250 L: clamping range 1-3/4 in to 2-5/8 in (44–67 mm), band width 5/8 in. If the hose has been changed since the old clamp was fitted, measure the hose outside diameter before ordering.

What size is the Breeze CT 250 L clamp?

Breeze CT 250 L fits 1-3/4 in to 2-5/8 in (44–67 mm). The band is 301 Stainless Steel.