Excoh 4SCH712 Cross Reference
Looking for Excoh aftermarket 4SCH712? It cross-references to OneTouch part OTE-4SCH712 – Hi-Torque Clamp Stainless Steel 6.25 in to 7.13 in. Same size, same fit, supplied in single units or export cartons.
OneTouch replacement
Hi-Torque Clamp Stainless Steel 6.25 in to 7.13 in
Part No. OTE-4SCH712
- Clamping Range 6-1/4 in to 7-1/8 in (159–181 mm)
- Band Width 5/8 in
- Band Material 301 Stainless Steel
OTE-4SCH712 specifications (replaces Excoh 4SCH712)
| Clamp Type | Hi-Torque Hose Clamp |
| Application | Heavy-Duty Hoses & Ducts |
| Clamping Range | 6-1/4 in to 7-1/8 in (159–181 mm) |
| Hex Size | 5/16 in |
| Torque Rating | 150 in-lbs |
| SAE | 712 |
| Band Width | 5/8 in |
| Band Material | 301 Stainless Steel |
| Screw | 410 Stainless Steel | 5/16 in hex |
| Sold As | Each |
Where the Excoh 4SCH712 clamp is used
Hi-torque clamps use a heavier band and screw housing than a standard hose clamp, for high-pressure air, coolant and fuel lines on trucks and equipment. OTE-4SCH712 is used on heavy-duty hoses & ducts.
Other part numbers that match OTE-4SCH712
5 more OEM and aftermarket numbers cross to the same clamp. Any of them can be ordered as OTE-4SCH712.
| Name | Part Number | Type |
|---|---|---|
| Breeze | HTM 700 | Aftermarket |
| Breeze | HTM700 | Aftermarket |
| Excoh | 4SCH712 | Aftermarket |
| Norma | 0156 0015 170 | Aftermarket |
| Norma | 1560015170 | Aftermarket |
| Norma | 01560015170 | Aftermarket |
Ordering OTE-4SCH712
Quote requests for OTE-4SCH712 are answered within 24 hours. Tell us the quantity, and mention Excoh 4SCH712 if you are replacing that number.
Questions about this number
Is OTE-4SCH712 the same as Excoh 4SCH712?
Yes. OTE-4SCH712 matches Excoh 4SCH712: clamping range 6-1/4 in to 7-1/8 in (159–181 mm), band width 5/8 in. If the hose has been changed since the old clamp was fitted, measure the hose outside diameter before ordering.
What size is the Excoh 4SCH712 clamp?
Excoh 4SCH712 fits 6-1/4 in to 7-1/8 in (159–181 mm). The band is 301 Stainless Steel.