Norma 01560015129 Cross Reference

Looking for Norma aftermarket 01560015129? It cross-references to OneTouch part OTE-4SCH918 – Hi-Torque Clamp Stainless Steel 4 in to 6.13 in. Same size, same fit, supplied in single units or export cartons.

OTE-4SCH918 specifications (replaces Norma 01560015129)

Clamp Type	Hi-Torque Hose Clamp
Application	Heavy-Duty Hoses & Ducts
Clamping Range	4 in to 6-1/8 in (102–156 mm)
Hex Size	5/16 in
Torque Rating	150 in-lbs
Band Width	5/8 in
Band Material	301 Stainless Steel
Screw	410 Stainless Steel | 5/16 in hex
Sold As	Each

Where the Norma 01560015129 clamp is used

Hi-torque clamps use a heavier band and screw housing than a standard hose clamp, for high-pressure air, coolant and fuel lines on trucks and equipment. OTE-4SCH918 is used on heavy-duty hoses & ducts.

Other part numbers that match OTE-4SCH918

5 more OEM and aftermarket numbers cross to the same clamp. Any of them can be ordered as OTE-4SCH918.

Ordering OTE-4SCH918

Ask for a quote with the number 01560015129 or OTE-4SCH918, plus your quantity. Small orders and full export cartons are both welcome, and we reply within 24 hours.

Questions about this number

Is OTE-4SCH918 the same as Norma 01560015129?

Yes. OTE-4SCH918 matches Norma 01560015129: clamping range 4 in to 6-1/8 in (102–156 mm), band width 5/8 in. If the hose has been changed since the old clamp was fitted, measure the hose outside diameter before ordering.

What size is the Norma 01560015129 clamp?

Norma 01560015129 fits 4 in to 6-1/8 in (102–156 mm). The band is 301 Stainless Steel.