How to Tighten a Hose Clamp Without Over-Torquing
If you want to tighten a hose clamp without over-torquing it, look at what over-torque did on one coolant retrofi...
01
Nov
Tag Archives: silicone hose
31
Oct
How to Install a T-Bolt Hose Clamp Step by Step
To install a T-bolt hose clamp, measure the hose OD where the band will sit and choose a clamp that puts that rea...
29
Oct
How to Install a German Type Hose Clamp Step by Step
To install a German type hose clamp (the non-perforated, embossed-band DIN 3017 worm clamp), pick a 9 mm or 12 mm...
20
Oct
What Is a Hose Clamp Liner and Do You Need One?
A hose clamp liner is a thin, smooth strip of metal fitted on the inside of a worm drive clamp band, between the ...
16
Oct
Best Hose Clamps for Silicone Hoses
Silicone hose looks tougher than the black rubber it replaces, and in some ways it is. It shrugs off heat that wo...
15
Oct
3 Inch Hose Clamp: How to Pick the Right Range
A 3 inch hose clamp is rarely holding something trivial. At this size the joint is usually carrying boosted air t...
15
Oct
1.5 Inch Hose Clamp: How to Pick the Right Range
Ask for a 1.5 inch hose clamp at a parts counter and the right answer is usually another question: what is it goi...