As a homeowner, you might occasionally need to cut stainless steel tubing. This can be a difficult task, to cut the SS pipes. Because pipes are crafted for durability and corrosion resistance, which makes them difficult to cut. But don’t worry, here we will tell you how to cut stainless steel pipe like a pro, by using the right tools and techniques.
Step-By-Step Guide: How To Cut Stainless Steel Pipe
Measure The Pipe- First of all, measure the pipe. Knowing the pipe length is a must to cut the correct size. Mark the pipe with a marker or pencil according to your need.
Choose The Tool- Choose the right tool to cut the pipe. There are many tools for cutting the pipes like an angel grinder, steel pipe cutter, chop saw, etc.
Safety Precautions- Before cutting the pipes, it’s necessary to take safety precautions. Make sure that your wear protective gloves and eyewear for protecting the hands and eyes. And, ensure that the area is well-ventilated. So, that any cutting-related odors may readily and swiftly dissipate.
Cut The Pipe- After taking all safety precautions, use any one right tool to cut the pipe. Then cut the pipe carefully where you marked the pipe. If you are using:
- Angle Grinder: Be careful to set the disc perpendicular to the pipe before beginning to cut while applying steady downward pressure. Avoid pushing the disc through the pipe, it might the disc to break.
- Pipe Cutter: Put the pipe inside, then tighten the tool’s end until it feels secure. Then, start spinning the cutter while progressively tightening the tool’s end to provide increased pressure. Continue rotations till the pipe is served.
- Chop Saw: Make sure the blade is in the proper position. Lower the blade into the pipe, it will be cut in seconds.
Deburr the Pipe- After cutting, remove sharp edges. Belt grinders help to deburr a pipe most quickly and easily. Turn it on and run the cut end of the pipe, down the running belt, removing the burr.
Clean the Pipe And Workspace- Now, Clean the pipe and the workspace. Remove the metal debris and shavings from the workspace. Clean through a vacuum cleaner or broom. After that use a clean cloth to wipe the pipe and remove any residue.