Gates 32040 Cross Reference

OneTouch OTX-4SC0040 is a direct interchange for Gates 32040. Both are a worm gear hose clamp with a clamping range of 2-1/16 in to 3 in (52–76 mm), so the clamp drops into the same position on the vehicle without changes to the hose or fitting.

OTX-4SC0040 specifications (replaces Gates 32040)

Clamp Type	Worm Gear Hose Clamp
Application	Coolant, Fuel & Air Hoses
Clamping Range	2-1/16 in to 3 in (52–76 mm)
Hex Size	5/16 in
Torque Rating	45 in-lbs
SAE	40
Band Width	1/2 in
Band Material	301 Stainless Steel
Screw	Zinc Plated Carbon Steel | 5/16 in hex
Sold As	Each

Where the Gates 32040 clamp is used

Worm gear hose clamps are the everyday fix for coolant, fuel, air and vacuum hoses. They tighten with a screwdriver or nut driver and can be reused. OTX-4SC0040 is used on coolant, fuel & air hoses.

Other part numbers that match OTX-4SC0040

8 more OEM and aftermarket numbers cross to the same clamp. Any of them can be ordered as OTX-4SC0040.

Ordering OTX-4SC0040

Quote requests for OTX-4SC0040 are answered within 24 hours. Tell us the quantity, and mention Gates 32040 if you are replacing that number.

Questions about this number

Is OTX-4SC0040 the same as Gates 32040?

Yes. OTX-4SC0040 matches Gates 32040: clamping range 2-1/16 in to 3 in (52–76 mm), band width 1/2 in. If the hose has been changed since the old clamp was fitted, measure the hose outside diameter before ordering.

What size is the Gates 32040 clamp?

Gates 32040 fits 2-1/16 in to 3 in (52–76 mm). The band is 301 Stainless Steel.