Spares H-64 Cross Reference

Looking for Spares aftermarket H-64? It cross-references to OneTouch part OTE-4SC0064 – Hose Clamp 3.56 in to 4.50 in. Same size, same fit, supplied in single units or export cartons.

OTE-4SC0064 specifications (replaces Spares H-64)

Clamp Type	Worm Gear Hose Clamp
Application	Coolant, Fuel & Air Hoses
Clamping Range	3-9/16 in to 4-1/2 in (91–114 mm)
Hex Size	5/16 in
Torque Rating	45 in-lbs
SAE	64
Band Width	1/2 in
Band Material	301 Stainless Steel
Screw	Zinc Plated Carbon Steel | 5/16 in hex
Sold As	Each

Where the Spares H-64 clamp is used

Worm gear hose clamps are the everyday fix for coolant, fuel, air and vacuum hoses. They tighten with a screwdriver or nut driver and can be reused. OTE-4SC0064 is used on coolant, fuel & air hoses.

Other part numbers that match OTE-4SC0064

17 more OEM and aftermarket numbers cross to the same clamp. Any of them can be ordered as OTE-4SC0064.

Ordering OTE-4SC0064

Quote requests for OTE-4SC0064 are answered within 24 hours. Tell us the quantity, and mention Spares H-64 if you are replacing that number.

Questions about this number

Is OTE-4SC0064 the same as Spares H-64?

Yes. OTE-4SC0064 matches Spares H-64: clamping range 3-9/16 in to 4-1/2 in (91–114 mm), band width 1/2 in. If the hose has been changed since the old clamp was fitted, measure the hose outside diameter before ordering.

What size is the Spares H-64 clamp?

Spares H-64 fits 3-9/16 in to 4-1/2 in (91–114 mm). The band is 301 Stainless Steel.