Breeze HTM200 Cross Reference

Looking for Breeze aftermarket HTM200? It cross-references to OneTouch part OTX-4SCH212 – Hi-Torque Clamp Stainless Steel 1.25 in to 2.13 in. Same size, same fit, supplied in single units or export cartons.

OTX-4SCH212 specifications (replaces Breeze HTM200)

Clamp Type	Hi-Torque Hose Clamp
Application	Heavy-Duty Hoses & Ducts
Clamping Range	1-1/4 in to 2-1/8 in (32–54 mm)
Hex Size	5/16 in
Torque Rating	150 in-lbs
SAE	212
Band Width	5/8 in
Band Material	301 Stainless Steel
Screw	410 Stainless Steel | 5/16 in hex
Sold As	Each

Where the Breeze HTM200 clamp is used

Hi-torque clamps use a heavier band and screw housing than a standard hose clamp, for high-pressure air, coolant and fuel lines on trucks and equipment. OTX-4SCH212 is used on heavy-duty hoses & ducts.

Other part numbers that match OTX-4SCH212

5 more OEM and aftermarket numbers cross to the same clamp. Any of them can be ordered as OTX-4SCH212.

Ordering OTX-4SCH212

Ask for a quote with the number HTM200 or OTX-4SCH212, plus your quantity. Small orders and full export cartons are both welcome, and we reply within 24 hours.

Questions about this number

Is OTX-4SCH212 the same as Breeze HTM200?

Yes. OTX-4SCH212 matches Breeze HTM200: clamping range 1-1/4 in to 2-1/8 in (32–54 mm), band width 5/8 in. If the hose has been changed since the old clamp was fitted, measure the hose outside diameter before ordering.

What size is the Breeze HTM200 clamp?

Breeze HTM200 fits 1-1/4 in to 2-1/8 in (32–54 mm). The band is 301 Stainless Steel.