Excoh 4SCH212 Cross Reference

OneTouch OTX-4SCH212 is a direct interchange for Excoh 4SCH212. Both are a hi-torque hose clamp with a clamping range of 1-1/4 in to 2-1/8 in (32–54 mm), so the clamp drops into the same position on the vehicle without changes to the hose or fitting.

OTX-4SCH212 specifications (replaces Excoh 4SCH212)

Clamp Type	Hi-Torque Hose Clamp
Application	Heavy-Duty Hoses & Ducts
Clamping Range	1-1/4 in to 2-1/8 in (32–54 mm)
Hex Size	5/16 in
Torque Rating	150 in-lbs
SAE	212
Band Width	5/8 in
Band Material	301 Stainless Steel
Screw	410 Stainless Steel | 5/16 in hex
Sold As	Each

Where the Excoh 4SCH212 clamp is used

Hi-torque clamps use a heavier band and screw housing than a standard hose clamp, for high-pressure air, coolant and fuel lines on trucks and equipment. OTX-4SCH212 is used on heavy-duty hoses & ducts.

Other part numbers that match OTX-4SCH212

5 more OEM and aftermarket numbers cross to the same clamp. Any of them can be ordered as OTX-4SCH212.

Ordering OTX-4SCH212

Ask for a quote with the number 4SCH212 or OTX-4SCH212, plus your quantity. Small orders and full export cartons are both welcome, and we reply within 24 hours.

Questions about this number

Is OTX-4SCH212 the same as Excoh 4SCH212?

Yes. OTX-4SCH212 matches Excoh 4SCH212: clamping range 1-1/4 in to 2-1/8 in (32–54 mm), band width 5/8 in. If the hose has been changed since the old clamp was fitted, measure the hose outside diameter before ordering.

What size is the Excoh 4SCH212 clamp?

Excoh 4SCH212 fits 1-1/4 in to 2-1/8 in (32–54 mm). The band is 301 Stainless Steel.