Breeze HTM 450 Cross Reference

Breeze HTM 450 is a Breeze aftermarket part number. The OneTouch Exim replacement is OTX-4SCH462, a hi-torque hose clamp with a clamping range of 3-3/4 in to 4-5/8 in (95–117 mm). It fits the same hose or pipe and installs the same way, so OTX-4SCH462 can be ordered wherever Breeze HTM 450 is called for.

OTX-4SCH462 specifications (replaces Breeze HTM 450)

Clamp Type	Hi-Torque Hose Clamp
Application	Heavy-Duty Hoses & Ducts
Clamping Range	3-3/4 in to 4-5/8 in (95–117 mm)
Hex Size	5/16 in
Torque Rating	150 in-lbs
SAE	462
Band Width	5/8 in
Band Material	301 Stainless Steel
Screw	410 Stainless Steel | 5/16 in hex
Sold As	Each

Where the Breeze HTM 450 clamp is used

Hi-torque clamps use a heavier band and screw housing than a standard hose clamp, for high-pressure air, coolant and fuel lines on trucks and equipment. OTX-4SCH462 is used on heavy-duty hoses & ducts.

Other part numbers that match OTX-4SCH462

5 more OEM and aftermarket numbers cross to the same clamp. Any of them can be ordered as OTX-4SCH462.

Ordering OTX-4SCH462

Ask for a quote with the number HTM 450 or OTX-4SCH462, plus your quantity. Small orders and full export cartons are both welcome, and we reply within 24 hours.

Questions about this number

Is OTX-4SCH462 the same as Breeze HTM 450?

Yes. OTX-4SCH462 matches Breeze HTM 450: clamping range 3-3/4 in to 4-5/8 in (95–117 mm), band width 5/8 in. If the hose has been changed since the old clamp was fitted, measure the hose outside diameter before ordering.

What size is the Breeze HTM 450 clamp?

Breeze HTM 450 fits 3-3/4 in to 4-5/8 in (95–117 mm). The band is 301 Stainless Steel.