Norma 0156 0015 106 Cross Reference

Looking for Norma aftermarket 0156 0015 106? It cross-references to OneTouch part OTX-4SCH462 – Hi-Torque Clamp Stainless Steel 3.75 in to 4.63 in. Same size, same fit, supplied in single units or export cartons.

Placeholder

OneTouch replacement

Hi-Torque Clamp Stainless Steel 3.75 in to 4.63 in

Part No. OTX-4SCH462

  • Clamping Range 3-3/4 in to 4-5/8 in (95–117 mm)
  • Band Width 5/8 in
  • Band Material 301 Stainless Steel

Get a quoteView clamp details

OTX-4SCH462 specifications (replaces Norma 0156 0015 106)

Clamp Type Hi-Torque Hose Clamp
Application Heavy-Duty Hoses & Ducts
Clamping Range 3-3/4 in to 4-5/8 in (95–117 mm)
Hex Size 5/16 in
Torque Rating 150 in-lbs
SAE 462
Band Width 5/8 in
Band Material 301 Stainless Steel
Screw 410 Stainless Steel | 5/16 in hex
Sold As Each

Where the Norma 0156 0015 106 clamp is used

Hi-torque clamps use a heavier band and screw housing than a standard hose clamp, for high-pressure air, coolant and fuel lines on trucks and equipment. OTX-4SCH462 is used on heavy-duty hoses & ducts.

Other part numbers that match OTX-4SCH462

5 more OEM and aftermarket numbers cross to the same clamp. Any of them can be ordered as OTX-4SCH462.

NamePart NumberType
BreezeHTM 450Aftermarket
BreezeHTM450Aftermarket
Excoh4SCH462Aftermarket
Norma0156 0015 106Aftermarket
Norma1560015106Aftermarket
Norma01560015106Aftermarket

Ordering OTX-4SCH462

Ask for a quote with the number 0156 0015 106 or OTX-4SCH462, plus your quantity. Small orders and full export cartons are both welcome, and we reply within 24 hours.

Questions about this number

Is OTX-4SCH462 the same as Norma 0156 0015 106?

Yes. OTX-4SCH462 matches Norma 0156 0015 106: clamping range 3-3/4 in to 4-5/8 in (95–117 mm), band width 5/8 in. If the hose has been changed since the old clamp was fitted, measure the hose outside diameter before ordering.

What size is the Norma 0156 0015 106 clamp?

Norma 0156 0015 106 fits 3-3/4 in to 4-5/8 in (95–117 mm). The band is 301 Stainless Steel.