Breeze HTM750 Cross Reference
Looking for Breeze aftermarket HTM750? It cross-references to OneTouch part OTX-4SCH762 – Hi-Torque Clamp Stainless Steel 6.75 in to 7.63 in. Same size, same fit, supplied in single units or export cartons.
OneTouch replacement
Hi-Torque Clamp Stainless Steel 6.75 in to 7.63 in
Part No. OTX-4SCH762
- Clamping Range 6-3/4 in to 7-5/8 in (172–194 mm)
- Band Width 5/8 in
- Band Material 301 Stainless Steel
OTX-4SCH762 specifications (replaces Breeze HTM750)
| Clamp Type | Hi-Torque Hose Clamp |
| Application | Heavy-Duty Hoses & Ducts |
| Clamping Range | 6-3/4 in to 7-5/8 in (172–194 mm) |
| Hex Size | 5/16 in |
| Torque Rating | 150 in-lbs |
| SAE | 762 |
| Band Width | 5/8 in |
| Band Material | 301 Stainless Steel |
| Screw | 410 Stainless Steel | 5/16 in hex |
| Sold As | Each |
Where the Breeze HTM750 clamp is used
Hi-torque clamps use a heavier band and screw housing than a standard hose clamp, for high-pressure air, coolant and fuel lines on trucks and equipment. OTX-4SCH762 is used on heavy-duty hoses & ducts.
Other part numbers that match OTX-4SCH762
5 more OEM and aftermarket numbers cross to the same clamp. Any of them can be ordered as OTX-4SCH762.
| Name | Part Number | Type |
|---|---|---|
| Breeze | HTM 750 | Aftermarket |
| Breeze | HTM750 | Aftermarket |
| Excoh | 4SCH762 | Aftermarket |
| Norma | 0156 0015 183 | Aftermarket |
| Norma | 1560015183 | Aftermarket |
| Norma | 01560015183 | Aftermarket |
Ordering OTX-4SCH762
Quote requests for OTX-4SCH762 are answered within 24 hours. Tell us the quantity, and mention Breeze HTM750 if you are replacing that number.
Questions about this number
Is OTX-4SCH762 the same as Breeze HTM750?
Yes. OTX-4SCH762 matches Breeze HTM750: clamping range 6-3/4 in to 7-5/8 in (172–194 mm), band width 5/8 in. If the hose has been changed since the old clamp was fitted, measure the hose outside diameter before ordering.
What size is the Breeze HTM750 clamp?
Breeze HTM750 fits 6-3/4 in to 7-5/8 in (172–194 mm). The band is 301 Stainless Steel.