Breeze HTM 750 Cross Reference

OneTouch OTE-4SCH762 is a direct interchange for Breeze HTM 750. Both are a hi-torque hose clamp with a clamping range of 6-3/4 in to 7-5/8 in (172–194 mm), so the clamp drops into the same position on the vehicle without changes to the hose or fitting.

OTE-4SCH762 specifications (replaces Breeze HTM 750)

Clamp Type	Hi-Torque Hose Clamp
Application	Heavy-Duty Hoses & Ducts
Clamping Range	6-3/4 in to 7-5/8 in (172–194 mm)
Hex Size	5/16 in
Torque Rating	150 in-lbs
SAE	762
Band Width	5/8 in
Band Material	301 Stainless Steel
Screw	410 Stainless Steel | 5/16 in hex
Sold As	Each

Where the Breeze HTM 750 clamp is used

Hi-torque clamps use a heavier band and screw housing than a standard hose clamp, for high-pressure air, coolant and fuel lines on trucks and equipment. OTE-4SCH762 is used on heavy-duty hoses & ducts.

Other part numbers that match OTE-4SCH762

5 more OEM and aftermarket numbers cross to the same clamp. Any of them can be ordered as OTE-4SCH762.

Ordering OTE-4SCH762

Ask for a quote with the number HTM 750 or OTE-4SCH762, plus your quantity. Small orders and full export cartons are both welcome, and we reply within 24 hours.

Questions about this number

Is OTE-4SCH762 the same as Breeze HTM 750?

Yes. OTE-4SCH762 matches Breeze HTM 750: clamping range 6-3/4 in to 7-5/8 in (172–194 mm), band width 5/8 in. If the hose has been changed since the old clamp was fitted, measure the hose outside diameter before ordering.

What size is the Breeze HTM 750 clamp?

Breeze HTM 750 fits 6-3/4 in to 7-5/8 in (172–194 mm). The band is 301 Stainless Steel.