Breeze CT 9432 B Cross Reference

Looking for Breeze aftermarket CT 9432 B? It cross-references to OneTouch part OTX-4CT0032 – Constant Torque Clamp 1.56 in to 2.50 in. Same size, same fit, supplied in single units or export cartons.

OTX-4CT0032 specifications (replaces Breeze CT 9432 B)

Clamp Type	Constant Torque Clamp
Application	Coolant & Heater Hoses
Clamping Range	1-9/16 in to 2-1/2 in (40–64 mm)
Hex Size	5/16 in
Torque Rating	70 in-lbs
SAE	32
Band Width	9/16 in
Band Material	301 Stainless Steel
Screw	410 Stainless Steel | 5/16 in hex
Sold As	Each

Where the Breeze CT 9432 B clamp is used

Constant torque clamps have a spring washer stack that keeps the clamp tight as the hose expands when hot and shrinks when cold, so coolant and heater lines do not seep after a cold start. OTX-4CT0032 is used on coolant & heater hoses.

Other part numbers that match OTX-4CT0032

5 more OEM and aftermarket numbers cross to the same clamp. Any of them can be ordered as OTX-4CT0032.

Ordering OTX-4CT0032

Quote requests for OTX-4CT0032 are answered within 24 hours. Tell us the quantity, and mention Breeze CT 9432 B if you are replacing that number.

Questions about this number

Is OTX-4CT0032 the same as Breeze CT 9432 B?

Yes. OTX-4CT0032 matches Breeze CT 9432 B: clamping range 1-9/16 in to 2-1/2 in (40–64 mm), band width 9/16 in. If the hose has been changed since the old clamp was fitted, measure the hose outside diameter before ordering.

What size is the Breeze CT 9432 B clamp?

Breeze CT 9432 B fits 1-9/16 in to 2-1/2 in (40–64 mm). The band is 301 Stainless Steel.