Breeze HTM 400 Cross Reference

Breeze HTM 400 is a Breeze aftermarket part number. The OneTouch Exim replacement is OTX-4SCH412, a hi-torque hose clamp with a clamping range of 3-1/4 in to 4-1/8 in (83–105 mm). It fits the same hose or pipe and installs the same way, so OTX-4SCH412 can be ordered wherever Breeze HTM 400 is called for.

OTX-4SCH412 specifications (replaces Breeze HTM 400)

Clamp Type	Hi-Torque Hose Clamp
Application	Heavy-Duty Hoses & Ducts
Clamping Range	3-1/4 in to 4-1/8 in (83–105 mm)
Hex Size	5/16 in
Torque Rating	150 in-lbs
SAE	412
Band Width	5/8 in
Band Material	301 Stainless Steel
Screw	410 Stainless Steel | 5/16 in hex
Sold As	Each

Where the Breeze HTM 400 clamp is used

Hi-torque clamps use a heavier band and screw housing than a standard hose clamp, for high-pressure air, coolant and fuel lines on trucks and equipment. OTX-4SCH412 is used on heavy-duty hoses & ducts.

Other part numbers that match OTX-4SCH412

5 more OEM and aftermarket numbers cross to the same clamp. Any of them can be ordered as OTX-4SCH412.

Ordering OTX-4SCH412

Ask for a quote with the number HTM 400 or OTX-4SCH412, plus your quantity. Small orders and full export cartons are both welcome, and we reply within 24 hours.

Questions about this number

Is OTX-4SCH412 the same as Breeze HTM 400?

Yes. OTX-4SCH412 matches Breeze HTM 400: clamping range 3-1/4 in to 4-1/8 in (83–105 mm), band width 5/8 in. If the hose has been changed since the old clamp was fitted, measure the hose outside diameter before ordering.

What size is the Breeze HTM 400 clamp?

Breeze HTM 400 fits 3-1/4 in to 4-1/8 in (83–105 mm). The band is 301 Stainless Steel.