Breeze HTM 650 Cross Reference

Looking for Breeze aftermarket HTM 650? It cross-references to OneTouch part OTX-4SCH662 – Hi-Torque Clamp Stainless Steel 5.75 in to 6.63 in. Same size, same fit, supplied in single units or export cartons.

OTX-4SCH662 specifications (replaces Breeze HTM 650)

Clamp Type	Hi-Torque Hose Clamp
Application	Heavy-Duty Hoses & Ducts
Clamping Range	5-3/4 in to 6-5/8 in (146–168 mm)
Hex Size	5/16 in
Torque Rating	150 in-lbs
SAE	662
Band Width	5/8 in
Band Material	301 Stainless Steel
Screw	410 Stainless Steel | 5/16 in hex
Sold As	Each

Where the Breeze HTM 650 clamp is used

Hi-torque clamps use a heavier band and screw housing than a standard hose clamp, for high-pressure air, coolant and fuel lines on trucks and equipment. OTX-4SCH662 is used on heavy-duty hoses & ducts.

Other part numbers that match OTX-4SCH662

5 more OEM and aftermarket numbers cross to the same clamp. Any of them can be ordered as OTX-4SCH662.

Ordering OTX-4SCH662

Quote requests for OTX-4SCH662 are answered within 24 hours. Tell us the quantity, and mention Breeze HTM 650 if you are replacing that number.

Questions about this number

Is OTX-4SCH662 the same as Breeze HTM 650?

Yes. OTX-4SCH662 matches Breeze HTM 650: clamping range 5-3/4 in to 6-5/8 in (146–168 mm), band width 5/8 in. If the hose has been changed since the old clamp was fitted, measure the hose outside diameter before ordering.

What size is the Breeze HTM 650 clamp?

Breeze HTM 650 fits 5-3/4 in to 6-5/8 in (146–168 mm). The band is 301 Stainless Steel.