Donaldson P238773 Cross Reference

OneTouch OTX-4VC1400 is a direct interchange for Donaldson P238773. Both are a v-band clamp, so the clamp drops into the same position on the vehicle without changes to the hose or fitting.

OTX-4VC1400 specifications (replaces Donaldson P238773)

Clamp Type	V-Band Clamp
Application	DPF / Aftertreatment
Nominal Diameter	14.00 in (355.6 mm)
Insert Thickness (A)	0.08 in
Insert Apex Width (B)	0.207 in
Insert Depth (C)	0.281 in
Band Thickness (D)	0.05 in
Band Width	0.875 in
Compatible With	Detroit Diesel Engine DD13/DD15/DD16
OEM Manufacturer	Detroit Diesel, Freightliner, Mack
Sold As	Each

Where the Donaldson P238773 clamp is used

V-band clamps join flanged exhaust, turbocharger, EGR and DPF connections. The tapered band pulls the two flanges together evenly, giving a tight seal that holds under heat and vibration. OTX-4VC1400 is used on dpf / aftertreatment.

Other part numbers that match OTX-4VC1400

18 more OEM and aftermarket numbers cross to the same clamp. Any of them can be ordered as OTX-4VC1400.

Ordering OTX-4VC1400

Ask for a quote with the number P238773 or OTX-4VC1400, plus your quantity. Small orders and full export cartons are both welcome, and we reply within 24 hours.

Questions about this number

Is OTX-4VC1400 the same as Donaldson P238773?

Yes. OTX-4VC1400 matches Donaldson P238773: band width 0.875 in. If the hose has been changed since the old clamp was fitted, measure the hose outside diameter before ordering.