Excoh 4SC0010 Cross Reference

Looking for Excoh aftermarket 4SC0010? It cross-references to OneTouch part OTX-4SC0010 – Hose Clamp 0.56 in to 1.06 in. Same size, same fit, supplied in single units or export cartons.

OTX-4SC0010 specifications (replaces Excoh 4SC0010)

Clamp Type	Worm Gear Hose Clamp
Application	Coolant, Fuel & Air Hoses
Clamping Range	9/16 in to 1-1/16 in (14–27 mm)
Hex Size	5/16 in
Torque Rating	45 in-lbs
SAE	10
Band Width	1/2 in
Band Material	301 Stainless Steel
Screw	Zinc Plated Carbon Steel | 5/16 in hex
Sold As	Each

Where the Excoh 4SC0010 clamp is used

Worm gear hose clamps are the everyday fix for coolant, fuel, air and vacuum hoses. They tighten with a screwdriver or nut driver and can be reused. OTX-4SC0010 is used on coolant, fuel & air hoses.

Other part numbers that match OTX-4SC0010

8 more OEM and aftermarket numbers cross to the same clamp. Any of them can be ordered as OTX-4SC0010.

Ordering OTX-4SC0010

Quote requests for OTX-4SC0010 are answered within 24 hours. Tell us the quantity, and mention Excoh 4SC0010 if you are replacing that number.

Questions about this number

Is OTX-4SC0010 the same as Excoh 4SC0010?

Yes. OTX-4SC0010 matches Excoh 4SC0010: clamping range 9/16 in to 1-1/16 in (14–27 mm), band width 1/2 in. If the hose has been changed since the old clamp was fitted, measure the hose outside diameter before ordering.

What size is the Excoh 4SC0010 clamp?

Excoh 4SC0010 fits 9/16 in to 1-1/16 in (14–27 mm). The band is 301 Stainless Steel.