Fairview HC6-72 Cross Reference

Looking for Fairview aftermarket HC6-72? It cross-references to OneTouch part OTX-4SC0072 – Hose Clamp 4.062 in to 5.00 in. Same size, same fit, supplied in single units or export cartons.

OTX-4SC0072 specifications (replaces Fairview HC6-72)

Clamp Type	Worm Gear Hose Clamp
Application	Coolant, Fuel & Air Hoses
Clamping Range	1-7/8 in to 5 in (48–127 mm)
Hex Size	5/16 in
Torque Rating	45 in-lbs
SAE	72
Band Width	1/2 in
Band Material	301 Stainless Steel
Screw	Zinc Plated Carbon Steel | 5/16 in hex
Sold As	Each

Where the Fairview HC6-72 clamp is used

Worm gear hose clamps are the everyday fix for coolant, fuel, air and vacuum hoses. They tighten with a screwdriver or nut driver and can be reused. OTX-4SC0072 is used on coolant, fuel & air hoses.

Other part numbers that match OTX-4SC0072

15 more OEM and aftermarket numbers cross to the same clamp. Any of them can be ordered as OTX-4SC0072.

Ordering OTX-4SC0072

Quote requests for OTX-4SC0072 are answered within 24 hours. Tell us the quantity, and mention Fairview HC6-72 if you are replacing that number.

Questions about this number

Is OTX-4SC0072 the same as Fairview HC6-72?

Yes. OTX-4SC0072 matches Fairview HC6-72: clamping range 1-7/8 in to 5 in (48–127 mm), band width 1/2 in. If the hose has been changed since the old clamp was fitted, measure the hose outside diameter before ordering.

What size is the Fairview HC6-72 clamp?

Fairview HC6-72 fits 1-7/8 in to 5 in (48–127 mm). The band is 301 Stainless Steel.