Fairview HC6104 Cross Reference
Looking for Fairview aftermarket HC6104? It cross-references to OneTouch part OTX-4SC0104 – Hose Clamp 6.56 in to 7.00 in. Same size, same fit, supplied in single units or export cartons.
OneTouch replacement
Part No. OTX-4SC0104
- Clamping Range 4-1/8 in to 7 in (105–178 mm)
- Band Width 1/2 in
- Band Material 301 Stainless Steel
OTX-4SC0104 specifications (replaces Fairview HC6104)
| Clamp Type | Worm Gear Hose Clamp |
| Application | Coolant, Fuel & Air Hoses |
| Clamping Range | 4-1/8 in to 7 in (105–178 mm) |
| Hex Size | 5/16 in |
| Torque Rating | 45 in-lbs |
| SAE | 104 |
| Band Width | 1/2 in |
| Band Material | 301 Stainless Steel |
| Screw | Zinc Plated Carbon Steel | 5/16 in hex |
| Sold As | Each |
Where the Fairview HC6104 clamp is used
Worm gear hose clamps are the everyday fix for coolant, fuel, air and vacuum hoses. They tighten with a screwdriver or nut driver and can be reused. OTX-4SC0104 is used on coolant, fuel & air hoses.
Other part numbers that match OTX-4SC0104
16 more OEM and aftermarket numbers cross to the same clamp. Any of them can be ordered as OTX-4SC0104.
| Name | Part Number | Type |
|---|---|---|
| Automann | 561.20104 | Aftermarket |
| Automann | 56120104 | Aftermarket |
| Breeze | 62104 | Aftermarket |
| Breeze | 62104H | Aftermarket |
| Dynacraft | D2006-2302 | Aftermarket |
| Dynacraft | D2006-3973 | Aftermarket |
| Dynacraft | D20062302 | Aftermarket |
| Dynacraft | D20063973 | Aftermarket |
| Excoh | 4SC0104 | Aftermarket |
| Fairview | HC6-104 | Aftermarket |
| Fairview | HC6104 | Aftermarket |
| Murray | H10400C | Aftermarket |
| Spares | H-104 | Aftermarket |
| Spares | H104 | Aftermarket |
| Tectran | HC104 | Aftermarket |
| Tramec Sloan | 491104 | Aftermarket |
| Velvac | 022404 | Aftermarket |
Ordering OTX-4SC0104
Ask for a quote with the number HC6104 or OTX-4SC0104, plus your quantity. Small orders and full export cartons are both welcome, and we reply within 24 hours.
Questions about this number
Is OTX-4SC0104 the same as Fairview HC6104?
Yes. OTX-4SC0104 matches Fairview HC6104: clamping range 4-1/8 in to 7 in (105–178 mm), band width 1/2 in. If the hose has been changed since the old clamp was fitted, measure the hose outside diameter before ordering.
What size is the Fairview HC6104 clamp?
Fairview HC6104 fits 4-1/8 in to 7 in (105–178 mm). The band is 301 Stainless Steel.