Gates 32620 Cross Reference
OneTouch OTX-4CT200S is a direct interchange for Gates 32620. Both are a heavy-duty constant torque clamp with a clamping range of 1-1/4 in to 2-1/8 in (32–54 mm), so the clamp drops into the same position on the vehicle without changes to the hose or fitting.
OneTouch replacement
Constant Torque Clamp HD 1.25 in to 2.13 in
Part No. OTX-4CT200S
- Clamping Range 1-1/4 in to 2-1/8 in (32–54 mm)
- Band Width 5/8 in
- Band Material 301 Stainless Steel
OTX-4CT200S specifications (replaces Gates 32620)
| Clamp Type | Heavy-Duty Constant Torque Clamp |
| Application | Coolant & Heater Hoses |
| Clamping Range | 1-1/4 in to 2-1/8 in (32–54 mm) |
| Hex Size | 3/8 in |
| Torque Rating | 92 in-lbs |
| SAE | 212 |
| Band Width | 5/8 in |
| Band Material | 301 Stainless Steel |
| Screw | 410 Stainless Steel | 3/8 in hex |
| Sold As | Each |
Where the Gates 32620 clamp is used
Constant torque clamps have a spring washer stack that keeps the clamp tight as the hose expands when hot and shrinks when cold, so coolant and heater lines do not seep after a cold start. OTX-4CT200S is used on coolant & heater hoses.
Other part numbers that match OTX-4CT200S
10 more OEM and aftermarket numbers cross to the same clamp. Any of them can be ordered as OTX-4CT200S.
| Name | Part Number | Type |
|---|---|---|
| Automann | 561.25200 | Aftermarket |
| Automann | 56125200 | Aftermarket |
| Breeze | CT 200 L SS | Aftermarket |
| Breeze | CT200LSS | Aftermarket |
| Excoh | 4CT200S | Aftermarket |
| Gates | 32620 | Aftermarket |
| Norma | 0156 0005 043 | Aftermarket |
| Norma | 1560005043 | Aftermarket |
| Norma | 01560005043 | Aftermarket |
| Tectran | HK200 | Aftermarket |
| Velvac | 022400 | Aftermarket |
Ordering OTX-4CT200S
Ask for a quote with the number 32620 or OTX-4CT200S, plus your quantity. Small orders and full export cartons are both welcome, and we reply within 24 hours.
Questions about this number
Is OTX-4CT200S the same as Gates 32620?
Yes. OTX-4CT200S matches Gates 32620: clamping range 1-1/4 in to 2-1/8 in (32–54 mm), band width 5/8 in. If the hose has been changed since the old clamp was fitted, measure the hose outside diameter before ordering.
What size is the Gates 32620 clamp?
Gates 32620 fits 1-1/4 in to 2-1/8 in (32–54 mm). The band is 301 Stainless Steel.