NAPA 705-1102 Cross Reference
OneTouch OTE-4SS0010 is a direct interchange for NAPA 705-1102. Both are a worm gear hose clamp with a clamping range of 9/16 in to 1-1/16 in (14–27 mm), so the clamp drops into the same position on the vehicle without changes to the hose or fitting.
OneTouch replacement
Hose Clamp Stainless Steel All 0.56 in to 1.06 in
Part No. OTE-4SS0010
- Clamping Range 9/16 in to 1-1/16 in (14–27 mm)
- Band Width 1/2 in
- Band Material 301 Stainless Steel
OTE-4SS0010 specifications (replaces NAPA 705-1102)
| Clamp Type | Worm Gear Hose Clamp |
| Application | Coolant, Fuel & Air Hoses |
| Clamping Range | 9/16 in to 1-1/16 in (14–27 mm) |
| Hex Size | 5/16 in |
| Torque Rating | 45 in-lbs |
| SAE | 10 |
| Band Width | 1/2 in |
| Band Material | 301 Stainless Steel |
| Screw | 410 Stainless Steel | 5/16 in hex |
| OEM Manufacturer | Sterling |
| Sold As | Each |
Where the NAPA 705-1102 clamp is used
Worm gear hose clamps are the everyday fix for coolant, fuel, air and vacuum hoses. They tighten with a screwdriver or nut driver and can be reused. OTE-4SS0010 is used on coolant, fuel & air hoses.
Other part numbers that match OTE-4SS0010
28 more OEM and aftermarket numbers cross to the same clamp. Any of them can be ordered as OTE-4SS0010.
| Name | Part Number | Type |
|---|---|---|
| Acdelco | 32210C | Aftermarket |
| Aero-Seal | 20010 | Aftermarket |
| Amgauge | CC10 | Aftermarket |
| Automann | 561.22010 | Aftermarket |
| Automann | 56122010 | Aftermarket |
| Breeze | 64010H | Aftermarket |
| Dayco | 92010 | Aftermarket |
| Dayco | K10S | Aftermarket |
| Excoh | 4SS0010 | Aftermarket |
| Gates | 32210 | Aftermarket |
| Gates | 32510 | Aftermarket |
| Goodyear | 51310 | Aftermarket |
| Ideal | 6810 | Aftermarket |
| Ideal | 6810590 | Aftermarket |
| Ideal | 630040010 | Aftermarket |
| Ideal | 630040010051 | Aftermarket |
| Murray | H12SS00C | Aftermarket |
| NAPA | 705-1102 | Aftermarket |
| NAPA | 7051102 | Aftermarket |
| Norma | 0361 0116 021 | Aftermarket |
| Norma | 3610116021 | Aftermarket |
| Norma | 03610116021 | Aftermarket |
| Norton | 033-10 | Aftermarket |
| Norton | 03310 | Aftermarket |
| Sterling | H110MS | OEM |
| Sterling | M108MS | OEM |
| Sure-Tite | 10HS | Aftermarket |
| Sure-Tite | 10KS3 | Aftermarket |
| Sure-Tite | C10PS | Aftermarket |
Ordering OTE-4SS0010
Quote requests for OTE-4SS0010 are answered within 24 hours. Tell us the quantity, and mention NAPA 705-1102 if you are replacing that number.
Questions about this number
Is OTE-4SS0010 the same as NAPA 705-1102?
Yes. OTE-4SS0010 matches NAPA 705-1102: clamping range 9/16 in to 1-1/16 in (14–27 mm), band width 1/2 in. If the hose has been changed since the old clamp was fitted, measure the hose outside diameter before ordering.
What size is the NAPA 705-1102 clamp?
NAPA 705-1102 fits 9/16 in to 1-1/16 in (14–27 mm). The band is 301 Stainless Steel.