Norma 0156 0005 035 Cross Reference

Looking for Norma aftermarket 0156 0005 035? It cross-references to OneTouch part OTX-4CT175S – Constant Torque Clamp HD 1 in to 1.75 in. Same size, same fit, supplied in single units or export cartons.

Placeholder

OneTouch replacement

Constant Torque Clamp HD 1 in to 1.75 in

Part No. OTX-4CT175S

  • Clamping Range 1 in to 1-3/4 in (25–44 mm)
  • Band Width 5/8 in
  • Band Material 301 Stainless Steel

Get a quoteView clamp details

OTX-4CT175S specifications (replaces Norma 0156 0005 035)

Clamp Type Heavy-Duty Constant Torque Clamp
Application Coolant & Heater Hoses
Clamping Range 1 in to 1-3/4 in (25–44 mm)
Hex Size 3/8 in
Torque Rating 92 in-lbs
SAE 28
Band Width 5/8 in
Band Material 301 Stainless Steel
Screw 410 Stainless Steel | 3/8 in hex
Sold As Each

Where the Norma 0156 0005 035 clamp is used

Constant torque clamps have a spring washer stack that keeps the clamp tight as the hose expands when hot and shrinks when cold, so coolant and heater lines do not seep after a cold start. OTX-4CT175S is used on coolant & heater hoses.

Other part numbers that match OTX-4CT175S

5 more OEM and aftermarket numbers cross to the same clamp. Any of them can be ordered as OTX-4CT175S.

NamePart NumberType
BreezeCT 175 L SSAftermarket
BreezeCT175LSSAftermarket
Excoh4CT175SAftermarket
Norma0156 0005 035Aftermarket
Norma1560005035Aftermarket
Norma01560005035Aftermarket

Ordering OTX-4CT175S

Ask for a quote with the number 0156 0005 035 or OTX-4CT175S, plus your quantity. Small orders and full export cartons are both welcome, and we reply within 24 hours.

Questions about this number

Is OTX-4CT175S the same as Norma 0156 0005 035?

Yes. OTX-4CT175S matches Norma 0156 0005 035: clamping range 1 in to 1-3/4 in (25–44 mm), band width 5/8 in. If the hose has been changed since the old clamp was fitted, measure the hose outside diameter before ordering.

What size is the Norma 0156 0005 035 clamp?

Norma 0156 0005 035 fits 1 in to 1-3/4 in (25–44 mm). The band is 301 Stainless Steel.