Norma 0156 0015 221 Cross Reference

Looking for Norma aftermarket 0156 0015 221? It cross-references to OneTouch part OTX-4SCH912 – Hi-Torque Clamp Stainless Steel 8.25 in to 9.13 in. Same size, same fit, supplied in single units or export cartons.

OTX-4SCH912 specifications (replaces Norma 0156 0015 221)

Clamp Type	Hi-Torque Hose Clamp
Application	Heavy-Duty Hoses & Ducts
Clamping Range	8-1/4 in to 9-1/8 in (210–232 mm)
Hex Size	5/16 in
Torque Rating	150 in-lbs
SAE	912
Band Width	5/8 in
Band Material	301 Stainless Steel
Screw	410 Stainless Steel | 5/16 in hex
Sold As	Each

Where the Norma 0156 0015 221 clamp is used

Hi-torque clamps use a heavier band and screw housing than a standard hose clamp, for high-pressure air, coolant and fuel lines on trucks and equipment. OTX-4SCH912 is used on heavy-duty hoses & ducts.

Other part numbers that match OTX-4SCH912

5 more OEM and aftermarket numbers cross to the same clamp. Any of them can be ordered as OTX-4SCH912.

Ordering OTX-4SCH912

Quote requests for OTX-4SCH912 are answered within 24 hours. Tell us the quantity, and mention Norma 0156 0015 221 if you are replacing that number.

Questions about this number

Is OTX-4SCH912 the same as Norma 0156 0015 221?

Yes. OTX-4SCH912 matches Norma 0156 0015 221: clamping range 8-1/4 in to 9-1/8 in (210–232 mm), band width 5/8 in. If the hose has been changed since the old clamp was fitted, measure the hose outside diameter before ordering.

What size is the Norma 0156 0015 221 clamp?

Norma 0156 0015 221 fits 8-1/4 in to 9-1/8 in (210–232 mm). The band is 301 Stainless Steel.