Norma 1560003170 Cross Reference

Looking for Norma aftermarket 1560003170? It cross-references to OneTouch part OTX-4CT700L – Constant Torque Clamp HD 6.25 in to 7.13 in. Same size, same fit, supplied in single units or export cartons.

OTX-4CT700L specifications (replaces Norma 1560003170)

Clamp Type	Heavy-Duty Constant Torque Clamp
Application	Coolant & Heater Hoses
Clamping Range	6-1/4 in to 7-1/8 in (159–181 mm)
Hex Size	3/8 in
Torque Rating	92 in-lbs
SAE	712
Band Width	5/8 in
Band Material	301 Stainless Steel
Screw	Zinc Plated Carbon Steel | 3/8 in hex
Sold As	Each

Where the Norma 1560003170 clamp is used

Constant torque clamps have a spring washer stack that keeps the clamp tight as the hose expands when hot and shrinks when cold, so coolant and heater lines do not seep after a cold start. OTX-4CT700L is used on coolant & heater hoses.

Other part numbers that match OTX-4CT700L

5 more OEM and aftermarket numbers cross to the same clamp. Any of them can be ordered as OTX-4CT700L.

Ordering OTX-4CT700L

Quote requests for OTX-4CT700L are answered within 24 hours. Tell us the quantity, and mention Norma 1560003170 if you are replacing that number.

Questions about this number

Is OTX-4CT700L the same as Norma 1560003170?

Yes. OTX-4CT700L matches Norma 1560003170: clamping range 6-1/4 in to 7-1/8 in (159–181 mm), band width 5/8 in. If the hose has been changed since the old clamp was fitted, measure the hose outside diameter before ordering.

What size is the Norma 1560003170 clamp?

Norma 1560003170 fits 6-1/4 in to 7-1/8 in (159–181 mm). The band is 301 Stainless Steel.