Tectran HC8 Cross Reference

OneTouch OTX-4SC0008 is a direct interchange for Tectran HC8. Both are a worm gear hose clamp with a clamping range of 1/2 in to 29/32 in (13–23 mm), so the clamp drops into the same position on the vehicle without changes to the hose or fitting.

OTX-4SC0008 specifications (replaces Tectran HC8)

Clamp Type	Worm Gear Hose Clamp
Application	Coolant, Fuel & Air Hoses
Clamping Range	1/2 in to 29/32 in (13–23 mm)
Hex Size	5/16 in
Torque Rating	45 in-lbs
SAE	8
Band Width	1/2 in
Band Material	301 Stainless Steel
Screw	Zinc Plated Carbon Steel | 5/16 in hex
Sold As	Each

Where the Tectran HC8 clamp is used

Worm gear hose clamps are the everyday fix for coolant, fuel, air and vacuum hoses. They tighten with a screwdriver or nut driver and can be reused. OTX-4SC0008 is used on coolant, fuel & air hoses.

Other part numbers that match OTX-4SC0008

8 more OEM and aftermarket numbers cross to the same clamp. Any of them can be ordered as OTX-4SC0008.

Ordering OTX-4SC0008

Ask for a quote with the number HC8 or OTX-4SC0008, plus your quantity. Small orders and full export cartons are both welcome, and we reply within 24 hours.

Questions about this number

Is OTX-4SC0008 the same as Tectran HC8?

Yes. OTX-4SC0008 matches Tectran HC8: clamping range 1/2 in to 29/32 in (13–23 mm), band width 1/2 in. If the hose has been changed since the old clamp was fitted, measure the hose outside diameter before ordering.

What size is the Tectran HC8 clamp?

Tectran HC8 fits 1/2 in to 29/32 in (13–23 mm). The band is 301 Stainless Steel.