Quick Release Hose Clamps: Pros and Cons
Picture a two-person cabinet shop with one dust collector on a cart, wheeled between a table saw, a planer and a ...
02
Nov
Tag Archives: worm gear clamps
26
Oct
Hose Clamp vs Zip Tie: Key Differences Explained
Hose clamp vs zip tie comes down to one job each. A zip tie (cable tie) bundles things together and holds them li...
26
Oct
Hose Clamp vs Pipe Clamp: Key Differences Explained
Hose clamp vs pipe clamp, in one line: a hose clamp squeezes a flexible hose down onto a rigid fitting so the joi...
25
Oct
Hose Clamp Screw Types: Slotted, Hex and Thumb Screw
Hose clamp screw types fall into three main groups: slotted hex (combination) screws you can turn with a flat scr...
24
Oct
Hose Clamp Failure: 10 Common Causes
Hose clamp failure nearly always traces back to one of a small set of causes: the wrong size, too little or too m...
24
Oct
Hose Clamp Band Width: Does It Matter?
Yes, hose clamp band width matters. The width of the band decides how much hose surface the clamp presses on, how...
22
Oct
304 vs 316 Stainless Steel Mini Hose Clamps: Which Should You Buy?
For a 304 vs 316 mini hose clamp decision, the short answer is this: choose 316 wherever the clamp will see salt ...
20
Oct
What Is a Mini Hose Clamp? Types, Uses and How It Works
What is a mini hose clamp? It is a hose clamp built for small lines, usually hoses or tubes under roughly 1 inch ...
20
Oct
What Is a Hose Clamp Liner and Do You Need One?
A hose clamp liner is a thin, smooth strip of metal fitted on the inside of a worm drive clamp band, between the ...
19
Oct
SAE J1508 Hose Clamp Standard Explained
Pick up almost any North American worm drive clamp catalogue and you will find the same three or four characters ...