How to Cut a Hose Clamp to Size
People who ask how to cut a hose clamp usually mean one of two quite different jobs. The first is trimming the ta...
19
Oct
Tag Archives: worm gear clamps
19
Oct
How to Choose the Right Worm Gear Hose Clamp for Your Application
Ask for "a hose clamp" at any parts counter and you will be handed a worm gear hose clamp. It is the default for ...
18
Oct
How to Choose the Right Mini Hose Clamp for Your Application
A mini hose clamp is the part people grab last and think about least. That's why the same small-line jobs come ba...
17
Oct
How Tight Should a Hose Clamp Be?
Ask ten mechanics how tight should a hose clamp be and most will say "until it feels right." Honest, but no help ...
17
Oct
How to Choose the Right Double Ear Clamp for Your Application
A double ear clamp is the small steel band with two raised loops that you see on air hose barbs, fuel lines on sm...
16
Oct
DIN 3017 Hose Clamp Standard Explained
If you have ever ordered hose clamps from a European supplier, or pulled one off a German-built engine, you have ...
16
Oct
Constant Tension Clamp vs Standard Hose Clamp: Key Differences Explained
A coolant hose that was dry when the truck left the shop is weeping a pink crust by the next cold morning. Nobody...
15
Oct
Hose Clamp Torque Chart by Band Width
A hose clamp torque chart is only useful if you know where each number came from and what kind of torque it descr...
15
Oct
Best Hose Clamps for Air Compressor Lines
Walk through any shop at the end of a shift, after the tools go quiet, and you can often hear it: a thin hiss fro...
15
Oct
1/2 Inch Hose Clamp: How to Pick the Right Range
A 1/2 inch hose clamp looks like the easiest part on the job. It costs little, it fits in a shirt pocket, and it ...