Breeze H800C Cross Reference

Looking for Breeze aftermarket H800C? It cross-references to OneTouch part OTX-4SCH008 – Lined Clamp 0.50 in to 0.91 in. Same size, same fit, supplied in single units or export cartons.

Lined Clamp 0.50 in to 0.91 in – OTX-4SCH008

OneTouch replacement

Lined Clamp 0.50 in to 0.91 in

Part No. OTX-4SCH008

  • Clamping Range 7/16 in to 29/32 in (11–23 mm)
  • Band Width 1/2 in
  • Band Material 301 Stainless Steel

Get a quoteView clamp details

OTX-4SCH008 specifications (replaces Breeze H800C)

Clamp Type Lined Worm Gear Hose Clamp
Application Coolant, Fuel & Air Hoses
Clamping Range 7/16 in to 29/32 in (11–23 mm)
Hex Size 5/16 in
Torque Rating 25-37 in-lbs
SAE 8
Band Width 1/2 in
Band Material 301 Stainless Steel
Screw Zinc Plated Carbon Steel | 5/16 in hex
Sold As Each

Where the Breeze H800C clamp is used

Lined clamps have a smooth inner liner that protects soft silicone and rubber hoses from being cut by the band slots. OTX-4SCH008 is used on coolant, fuel & air hoses.

Other part numbers that match OTX-4SCH008

8 more OEM and aftermarket numbers cross to the same clamp. Any of them can be ordered as OTX-4SCH008.

NamePart NumberType
Automann561.20008Aftermarket
Automann56120008Aftermarket
Breeze62008Aftermarket
BreezeH800CAftermarket
Excoh4SCH008Aftermarket
Gates32008Aftermarket
MurrayH800CAftermarket
TectranHC8Aftermarket
Velvac022308Aftermarket

Ordering OTX-4SCH008

Quote requests for OTX-4SCH008 are answered within 24 hours. Tell us the quantity, and mention Breeze H800C if you are replacing that number.

Questions about this number

Is OTX-4SCH008 the same as Breeze H800C?

Yes. OTX-4SCH008 matches Breeze H800C: clamping range 7/16 in to 29/32 in (11–23 mm), band width 1/2 in. If the hose has been changed since the old clamp was fitted, measure the hose outside diameter before ordering.

What size is the Breeze H800C clamp?

Breeze H800C fits 7/16 in to 29/32 in (11–23 mm). The band is 301 Stainless Steel.