Breeze HP5 Cross Reference

OneTouch OTX-4SCH916 is a direct interchange for Breeze HP5. Both are a hi-torque hose clamp with a clamping range of 6-1/8 in to 9-1/8 in (156–232 mm), so the clamp drops into the same position on the vehicle without changes to the hose or fitting.

OTX-4SCH916 specifications (replaces Breeze HP5)

Clamp Type	Hi-Torque Hose Clamp
Application	Heavy-Duty Hoses & Ducts
Clamping Range	6-1/8 in to 9-1/8 in (156–232 mm)
Hex Size	5/16 in
Torque Rating	150 in-lbs
Band Width	5/8 in
Band Material	301 Stainless Steel
Screw	410 Stainless Steel | 5/16 in hex
Sold As	Each

Where the Breeze HP5 clamp is used

Hi-torque clamps use a heavier band and screw housing than a standard hose clamp, for high-pressure air, coolant and fuel lines on trucks and equipment. OTX-4SCH916 is used on heavy-duty hoses & ducts.

Other part numbers that match OTX-4SCH916

7 more OEM and aftermarket numbers cross to the same clamp. Any of them can be ordered as OTX-4SCH916.

Ordering OTX-4SCH916

Ask for a quote with the number HP5 or OTX-4SCH916, plus your quantity. Small orders and full export cartons are both welcome, and we reply within 24 hours.

Questions about this number

Is OTX-4SCH916 the same as Breeze HP5?

Yes. OTX-4SCH916 matches Breeze HP5: clamping range 6-1/8 in to 9-1/8 in (156–232 mm), band width 5/8 in. If the hose has been changed since the old clamp was fitted, measure the hose outside diameter before ordering.

What size is the Breeze HP5 clamp?

Breeze HP5 fits 6-1/8 in to 9-1/8 in (156–232 mm). The band is 301 Stainless Steel.