Excoh 4SCH916 Cross Reference

OneTouch OTX-4SCH916 is a direct interchange for Excoh 4SCH916. Both are a hi-torque hose clamp with a clamping range of 6-1/8 in to 9-1/8 in (156–232 mm), so the clamp drops into the same position on the vehicle without changes to the hose or fitting.

OTX-4SCH916 specifications (replaces Excoh 4SCH916)

Clamp Type	Hi-Torque Hose Clamp
Application	Heavy-Duty Hoses & Ducts
Clamping Range	6-1/8 in to 9-1/8 in (156–232 mm)
Hex Size	5/16 in
Torque Rating	150 in-lbs
Band Width	5/8 in
Band Material	301 Stainless Steel
Screw	410 Stainless Steel | 5/16 in hex
Sold As	Each

Where the Excoh 4SCH916 clamp is used

Hi-torque clamps use a heavier band and screw housing than a standard hose clamp, for high-pressure air, coolant and fuel lines on trucks and equipment. OTX-4SCH916 is used on heavy-duty hoses & ducts.

Other part numbers that match OTX-4SCH916

7 more OEM and aftermarket numbers cross to the same clamp. Any of them can be ordered as OTX-4SCH916.

Ordering OTX-4SCH916

Send us the Excoh 4SCH916 number with the quantity you need and your delivery country. We reply within 24 hours with price and lead time for OTX-4SCH916.

Questions about this number

Is OTX-4SCH916 the same as Excoh 4SCH916?

Yes. OTX-4SCH916 matches Excoh 4SCH916: clamping range 6-1/8 in to 9-1/8 in (156–232 mm), band width 5/8 in. If the hose has been changed since the old clamp was fitted, measure the hose outside diameter before ordering.

What size is the Excoh 4SCH916 clamp?

Excoh 4SCH916 fits 6-1/8 in to 9-1/8 in (156–232 mm). The band is 301 Stainless Steel.