Norma 0362 0302 029 Cross Reference

OneTouch OTX-4CT0016 is a direct interchange for Norma 0362 0302 029. Both are a constant torque clamp with a clamping range of 13/16 in to 1-1/2 in (21–38 mm), so the clamp drops into the same position on the vehicle without changes to the hose or fitting.

OTX-4CT0016 specifications (replaces Norma 0362 0302 029)

Clamp Type	Constant Torque Clamp
Application	Coolant & Heater Hoses
Clamping Range	13/16 in to 1-1/2 in (21–38 mm)
Hex Size	5/16 in
Torque Rating	70 in-lbs
SAE	16
Band Width	9/16 in
Band Material	301 Stainless Steel
Screw	410 Stainless Steel | 5/16 in hex
Sold As	Each

Where the Norma 0362 0302 029 clamp is used

Constant torque clamps have a spring washer stack that keeps the clamp tight as the hose expands when hot and shrinks when cold, so coolant and heater lines do not seep after a cold start. OTX-4CT0016 is used on coolant & heater hoses.

Other part numbers that match OTX-4CT0016

9 more OEM and aftermarket numbers cross to the same clamp. Any of them can be ordered as OTX-4CT0016.

Ordering OTX-4CT0016

Quote requests for OTX-4CT0016 are answered within 24 hours. Tell us the quantity, and mention Norma 0362 0302 029 if you are replacing that number.

Questions about this number

Is OTX-4CT0016 the same as Norma 0362 0302 029?

Yes. OTX-4CT0016 matches Norma 0362 0302 029: clamping range 13/16 in to 1-1/2 in (21–38 mm), band width 9/16 in. If the hose has been changed since the old clamp was fitted, measure the hose outside diameter before ordering.

What size is the Norma 0362 0302 029 clamp?

Norma 0362 0302 029 fits 13/16 in to 1-1/2 in (21–38 mm). The band is 301 Stainless Steel.