Hose clamp price in India depends mainly on the band material (mild steel, SS 201, SS 301/304 or SS 316), band width and thickness, clamp size and family, screw grade, and order quantity. GST, freight and branding come on top of that. Two quotes for a clamp that sounds the same can differ several times over, because the quotes are not for the same clamp.
This article breaks a quoted rate into its parts so you can read any supplier’s number, whether it comes from a local trader, an online marketplace or a hose clamp manufacturer in India. It covers price only. For range planning, packaging, inspection and landed cost on export orders, read our bulk hose clamp buying guide for distributors. For the approval steps a purchase team follows before raising a PO, use the hose clamp buying checklist for purchase managers.
Why the hose clamp price for one “size” can vary three to five times
A buyer asks three suppliers for “1 inch SS hose clamp, 1,000 pcs” and gets three rates far apart, with the dearest several times the cheapest. Nobody is necessarily cheating. The request left most of the cost decisions open, so each supplier filled the gaps in its own way.
Here is what “1 inch SS hose clamp” leaves out:
- Which stainless. “SS” can mean a 200 series band, a 300 series band with a plated carbon steel screw, or an all-stainless part. Their raw material costs differ a lot.
- Which “1 inch”. It could be the hose bore, the hose outside diameter, or the middle of the clamping range. Each points to a different clamp length.
- Which family. Worm drive, constant torque and T-bolt clamps can all fit a 1 inch hose, and the T-bolt carries far more metal.
- Which band. Narrow or wide, thin or thick, perforated or embossed.
- What comes with it. A test record, a printed part number on the band, boxed packs of 10 or loose in a sack, delivered or ex-works, GST inside the rate or added on top.
Each gap is a cost lever. The cheapest answers give a thin 200 series band, plated screw and a loose bag; the dearest give a thicker 316 band, stainless screw, test records and labelled boxes. Both get sold as a “1 inch SS hose clamp”.
Public marketplace listings show the same spread. We looked at hose clamp category pages on IndiaMART and TradeIndia in October 2026. The table below gives the broad bands we saw. Treat it only as an indication of how wide the field is, not as a price list.
| Listing type (as described by sellers) | Indicative listed rate | What the listings often left out |
|---|---|---|
| Mild steel or galvanised worm drive clamp, small sizes | Roughly ₹4 to ₹10 per piece | Size, band width, plating type |
| Stainless worm drive clamp (listed as 202, 304 or “202/304”), small to mid sizes | Roughly ₹13 to ₹55 per piece | Screw grade, exact size, whether GST is included |
| Stainless worm drive clamp sold as heavy duty SS 304, about 1 inch | Roughly ₹250 to ₹300 per piece (two listings) | Band width, torque rating, brand |
The spread inside each row is already wide, grades are written loosely (“202/304” in one listing), and the heavy-duty listings sit in another bracket entirely: different products, not different prices.
Price anatomy: what sits inside a hose clamp price in India
Read a quoted rate as layers: raw material and how much of it, then the parts the clamp family needs, then quality, branding and packing, then quantity, freight and tax. Each layer below moves the number.
Material: MS zinc-plated, SS 201, SS 301/304 and SS 316
Material is the biggest single driver of hose clamp price in India, and it is where most hidden substitution happens. Four broad options turn up in Indian quotes:
- Mild steel (MS), zinc-plated. The cheapest. Fine indoors and in dry engine bays, but the plating is a thin sacrificial layer, and once it is gone the band rusts.
- SS 201 (and other 200 series). Austenitic stainless in which manganese and nitrogen stand in for some nickel. The 200 series is designed to minimise nickel, which is why it costs less. It is generally considered less corrosion resistant than 304.
- SS 301 and SS 304. The usual bands for good-quality stainless worm gear clamps. Grade 301 is common in clamp bands because it work-hardens well and keeps its spring. The Nickel Institute puts 304 at about 8% nickel.
- SS 316. About 11% nickel plus molybdenum for chloride resistance, so it costs more than 304. Specify it for marine, coastal and chemical-wash duty. For the general comparison, see our 304 vs 316 worm gear hose clamp guide.
Stainless prices also move over time, which is why a rate you got in spring may not hold in autumn. Strip producers add an alloy surcharge to the base price. One strip maker, Ulbrich, resets its alloy surcharges monthly and names nickel, chromium and molybdenum as the main drivers for common stainless grades. Those metals trade internationally, so currency movement feeds into Indian strip prices too. Grades with more nickel and molybdenum swing more, so a 316 clamp’s rate is usually less stable than a 304 clamp’s. Expect a quote validity period, often short, on any stainless order.
DIN-style W-codes for clamp material help here, since each code says which parts are plated and which are stainless, and that tracks cost closely.
Band width and thickness
A clamp’s band is a strip of metal sold by weight. A wider or thicker band uses more steel per clamp, so it costs more even at the same grade and length. It also needs a stronger housing, and often a larger screw, to carry the extra load. That is why a 9 mm band German type clamp and a 12 mm band clamp of the same range are priced differently, and why a 1/2 in band American type clip and a 9/16 in or 5/8 in heavy-duty band are not interchangeable on price.
Thickness is the quiet one. A supplier can trim a few hundredths of a millimetre from the band and cut the steel cost without changing anything you can see in a photo. Ask for band width and thickness in millimetres on the quote.
Size and band length
Longer bands cost more, but price does not rise in a straight line. Screw and housing cost about the same on small and medium clamps, so tiny sizes carry a high share of fixed cost, while very large sizes run in small batches.
Size naming makes this worse. One supplier’s “25 mm” means the bottom of the range, another’s means the middle. Quote against a clamping range in millimetres or inches, or an SAE size number, never a single nominal figure. The hose clamp size chart in mm and inches gives the common ranges.
Clamp family: worm gear, constant torque, T-bolt and V-band
The family sets the part count and the process. Typical cost order, lowest first:
- Worm gear (worm drive) clips. Band, housing and screw, made at high volume on automated lines. This is the price floor for a screw clamp, and most worm drive clip price comparisons are about grade and band.
- Constant torque clamps. A worm gear clamp with a stack of Belleville spring washers on the screw, which keeps tension as the hose cools and shrinks. Extra parts and assembly mean a higher rate.
- T-bolt clamps. A wide, thicker band, a formed bridge, a bolt and a nut, sometimes a spring. Much more metal per clamp. Our 4TB0175 T-bolt (1.75 to 2 in), for example, lists a 3/4 in band of 301 stainless and a 150 in-lb rating.
- V-band clamps. A profiled band rolled or pressed into a V, a latch or T-bolt, and often matching flanges. Profile tooling and tighter tolerances put them in the top bracket, especially in larger diameters.
So the first check on any quote is that it is for the family you specified. A worm gear clip offered against a T-bolt enquiry will look cheap because it is a different, lighter product.
Screw grade
Many “stainless” clamps pair a stainless band with a plated carbon steel screw. That saves money, and in dry service it works. In wet or salty service the screw rusts first, and a rusted screw is a failed clamp. A 410 stainless screw costs more than a plated one. A 300 series screw costs more again and is normal on full 316 clamps.
Our own range shows the effect. The 4SC0016 and the all-stainless 4SS0016 cover the same 13/16 to 1-1/2 in range and share band width, hex and torque rating. The 4SS0016 is built entirely in stainless (301 band and housing, 410 screw), and that build is where the price differs.
Liner under the band
A liner is a smooth strip under the perforations that stops the band slots biting into soft silicone or thin-wall hose. It adds a part and an assembly step, so lined clamps cost more than the plain clamp in the same range. You pay for a liner only where the hose needs one; specifying it everywhere just inflates the rate.
Standard compliance and testing
A clamp built to SAE J1508 or DIN 3017 has defined dimensions, materials and performance tests behind it. Making to a standard means tighter tooling, controlled material and regular checks such as torque and dimensional inspection. Asking for test records, material certificates or third-party inspection adds cost again, because someone has to run and document the tests.
That is worth paying for on fuel, coolant and OEM lines; less so on a garden tap. Either way, ask for the same documents on every quote so the rates are comparable.
Brand versus unbranded
Known European and American clamp brands carry design, testing and distribution costs, plus import duty when brought into India. Their rate reflects all of that. Unbranded clamps from small workshops carry little of it, but also little accountability: no part number to trace, no stated torque rating, no one to call when a batch fails.
Between the two sit manufacturers and exporters with their own part numbers and published specifications. Their clamps often cross-reference to the big brands’ numbers, so you can match the spec without paying the brand premium. Our clamp cross-reference index exists for exactly this.
Packaging and labelling
Bulk packing in poly bags inside a carton is cheapest. Small boxes of 10 or 50, printed labels, barcodes, part numbers stamped on the band, your own brand on the box or retail blister cards all add material and labour. A retail-ready pack can add noticeably to the rate of a small clamp, because the packaging is a big share of what is a low-cost part. Price the packing as its own line so you can see it.
Order quantity
Every production run carries a fixed setup cost: changing the band slitting, the forming die, the housing tooling, and the first-piece checks. Spread over a large run, that cost per piece is small. Spread over a few hundred pieces, it matters. That is why the rate drops in steps as quantity rises, and why very small orders of an uncommon size can cost more per piece than a carton of a common one.
If you need many sizes, ask which are stock items; stock sizes avoid the setup charge.
Freight and location
Domestic freight per clamp is usually modest, but it skews a comparison when one supplier quotes ex-works from another state and another quotes delivered. Courier charges for small urgent lots can add a large share to a cheap clamp. Check whether the rate is ex-works, delivered, or “freight extra at actuals”. For export orders, Incoterms, insurance and destination charges belong in a full landed cost calculation, which the distributor guide sets out step by step.
| Cost driver | What pushes the rate up | What to write on your enquiry |
|---|---|---|
| Band material | 300 series over 200 series; 316 over 304; all-stainless over plated | Grade for band, housing and screw separately |
| Band width and thickness | Wider and thicker bands | Width and thickness in mm |
| Size | Larger diameters; very small and very large sizes in small runs | Clamping range (min to max), not a single size |
| Clamp family | Constant torque, T-bolt and V-band over worm gear | Family and any spring or latch type |
| Screw | 410 or 300 series stainless over zinc-plated | Screw grade and hex size |
| Liner | Lined over unlined | Liner only where the hose needs it |
| Standard and testing | Build to SAE J1508 or DIN 3017; test records; certificates | Standard reference and documents wanted |
| Brand | Imported brand names | Brand, or “equivalent to part number …” |
| Packing | Small boxes, labels, barcodes, private label | Pack quantity and label content |
| Quantity | Small runs of non-stock sizes | Quantity per size and annual estimate |
| Freight | Delivered pricing, urgent courier | Ex-works or delivered, and to where |
Hose clamp GST rate and customs duty (HSN 7326)
Tax is the layer of hose clamp price in India that most often makes two quotes look different when they are not. One supplier writes “₹X + GST” and another writes “₹Y inclusive”. Put both on the same basis before you compare.
GST on hose clamps bought in India
Steel hose clamps are commonly classified under heading 7326 (other articles of iron or steel), usually at tariff item 7326 90 99. The GST rate tables we checked in October 2026 list 18% for this heading (9% CGST plus 9% SGST within a state, or 18% IGST between states). The September 2025 GST rate changes moved some specific items under 7326 to a lower rate, so the heading no longer carries one rate for every product. We found nothing to suggest hose clamps were among those items, but we have not seen a ruling that names them.
So: expect 18% on a domestic invoice for steel or stainless hose clamps, and confirm the HSN code and rate with your supplier and your tax adviser before you rely on it. The official notifications are on the CBIC tax information portal. Two practical points:
- If you are GST-registered and the clamps are business inputs, you can usually claim input tax credit, so the GST is not a final cost. It still affects cash flow and must appear correctly on the invoice.
- A seller whose invoice shows no GST at all, or the wrong HSN code, gives you a credit problem later. That is a cost too, even if the rate looked lower.
Basic customs duty on imported clamps
Imported clamps attract basic customs duty, a social welfare surcharge calculated on that duty, and IGST on the assessable value plus duties. The figures for 7326 90 99 differ between the tariff look-up sites we checked, and rates can change in any Union Budget, so we are not quoting a number. Check the current rate in the customs tariff on ICEGATE or with your customs broker, and check whether any trade agreement lowers the duty for the origin country. Add duty, surcharge, clearing charges and inland freight before comparing an imported clamp’s rate with a domestic one.
How to compare two SS hose clamp rates line by line
Before you call one quote “cheaper”, rewrite both onto the same sheet. Every line in the table below either changes the rate or tells you the rate is for something else. If a quote cannot answer a line, ask; if the supplier will not answer, treat that as an answer.
| Check | Quote A | Quote B | Why it matters |
|---|---|---|---|
| Clamp family and design (perforated, embossed, lined, spring) | Different families are different products | ||
| Clamping range, min to max | “1 inch” can mean three different clamps | ||
| Band grade, width, thickness | Largest material cost lever | ||
| Housing grade | A plated housing rusts like a plated screw | ||
| Screw grade and hex size | Plated vs stainless screw sets service life | ||
| Torque rating or standard reference | No rating means no performance claim | ||
| Price unit (per piece, per 100, per kg) | Per-kg rates hide band thickness | ||
| GST included or extra; HSN code shown | 18% swing if one is inclusive | ||
| Packing and labelling | Boxes and labels are real cost | ||
| Ex-works or delivered | Freight may be missing from one rate | ||
| Minimum quantity and price breaks | Rate may only apply at a higher volume | ||
| Validity date and surcharge clause | Stainless rates move with alloy prices | ||
| Lead time and payment terms | Advance payment is a cost of money | ||
| Samples and documents offered | What you can verify before the bulk lot |
Watch the price unit closely. Some Indian listings quote clamps per kilogram. A per-kg rate looks fair, but a thinner band gives you more clamps per kilogram and a weaker clamp per piece. Convert everything to a rate per piece for a stated size before comparing.
Then weigh the cost of failure. A clamp that saves a little but needs replacing after one monsoon costs more in labour, downtime and hose damage than it saved.
Red flags in a very low stainless steel hose clamp price
A low rate is not a problem by itself; stock items and big runs lower prices honestly. These signs suggest the saving came from the clamp:
SS 201 sold as SS 304
This is the most common substitution because the two look the same when new. A clamp sold as “304” at a rate close to 200 series prices deserves a check. A magnet is not a reliable test: cold-worked 301 and 304 bands can be slightly magnetic, and some 200 series grades are hardly magnetic at all. Our article on magnetic vs non-magnetic stainless steel explains why. A handheld XRF analyser, a mill test certificate traced to the batch, or a lab analysis of a sample gives a real answer. Write the grade on the PO so a wrong grade is a clear rejection.
Thin or narrow band
Measure band thickness with a micrometer on samples from the supplier and again on the bulk lot. A band noticeably thinner than the sample or the quoted figure will stretch, strip at the slots or deform at the housing under torque. Narrow bands also concentrate pressure and can cut soft hose.
Plated screw on an “all SS” clamp
Check the screw separately. A plated screw on a clamp quoted as all stainless often shows a slight yellow or blue tint, and it will rust at the slot and thread after a few months outdoors. If the quote says “SS hose clamp” without naming the screw grade, assume plated until told otherwise.
Other warning signs
- No torque rating, no standard reference and no part number anywhere.
- Housing that rocks on the band, or a screw that skips teeth under moderate torque.
- Size ranges that drift between samples and bulk, or clamps in one bag that do not match each other.
- Rough slot edges and burrs, which point to worn tooling and will damage hose.
- Reluctance to send a sample, a material certificate or a proper GST invoice.
- A rate far below every other quote for the same written spec. Raw material alone sets a floor, and a quote below it is usually not for the spec you wrote.
How OneTouch prices clamps as a hose clamp manufacturer in India
We do not publish a price list, and our product pages carry a quote request instead of a rate. That is deliberate: grade, quantity, packing and destination change the number, and a list price would be wrong for most buyers. What we do publish is the specification, so you can see what you are being quoted for. Every product page states what each part is made of, plus the band width, drive hex and rated torque.
Our quoting works like this:
- Tell us the part. Use our part number, or look up your current OEM or brand number in the cross-reference index, which matches over 3,500 part numbers from about 100 manufacturers to our clamps.
- Tell us the conditions. Quantity per size, the grade you need, packing and labelling, and the delivery point. The contact form has fields for product, grade and quantity.
- Get a rate that states its basis. Our product pages promise a reply within 24 hours. The quote names the materials, pack, price unit and validity, so you can drop it straight into the comparison grid above.
We will also tell you where a cheaper build does the job. If a 4SC worm gear clamp suits a dry engine bay, there is no reason to pay for an all-stainless 4SS. If your enquiry asks for a family we do not make, we will say so and point you to the nearest part we do make.
Hose clamp price questions from Indian buyers
Why is an SS hose clamp rate so different between two shops?
Usually because the clamps differ in ways the label hides: band grade (200 series vs 300 series), band thickness, screw material, size range, packing, or whether GST and freight are included. Put both on the comparison grid above and the gap normally explains itself.
What GST applies to hose clamps?
Steel and stainless hose clamps are commonly invoiced under HSN 7326 (often 7326 90 99) at 18% GST, based on the rate tables we checked in October 2026. Rates for some items under 7326 changed in September 2025, so confirm the code and rate with your supplier and tax adviser before relying on it.
Is SS 201 acceptable for hose clamps?
For dry, indoor or short-life use it can be. It costs less because it uses less nickel, but it is generally less corrosion resistant than 304. For outdoor, wet, coastal or washdown service, specify 301/304 at minimum, or 316 where chlorides are present, and state it on the order.
Does a higher worm drive clip price mean better quality?
Not on its own. A higher rate may reflect a brand name, small pack sizes or freight rather than a better clamp. Judge quality by the written spec (grades, band dimensions, torque rating, standard) and by checking samples, then compare price on the same spec.
Why did my stainless clamp rate change between orders?
Stainless strip prices follow alloy surcharges, which strip makers adjust as nickel, chromium and molybdenum prices move, and currency movement adds to it. A 316 clamp tends to move more than a 304 clamp. Check the validity date on each quote and ask whether a surcharge clause applies.
Is it cheaper to import branded clamps or buy from an Indian manufacturer?
It depends on the part and volume. Imported branded clamps carry the brand premium plus customs duty, surcharge, IGST and clearing costs. An Indian manufacturer with cross-referenced part numbers can often supply the same specification without those layers, but compare the full landed rate and the written spec, not the headline figure.
Get a rate you can compare
The fastest way to a fair hose clamp price in India is a precise enquiry. Look up the part you use today in our cross-reference index, note the grade, quantity and packing you need, and send it through our quote request page. You will get a rate that spells out what it covers, so you can set it next to any other quote line by line.