Breeze HTM 250 Cross Reference

Looking for Breeze aftermarket HTM 250? It cross-references to OneTouch part OTX-4SCH262 – Hi-Torque Clamp Stainless Steel 1.75 in to 2.63 in. Same size, same fit, supplied in single units or export cartons.

Placeholder

OneTouch replacement

Hi-Torque Clamp Stainless Steel 1.75 in to 2.63 in

Part No. OTX-4SCH262

  • Clamping Range 1-3/4 in to 2-5/8 in (45–67 mm)
  • Band Width 5/8 in
  • Band Material 301 Stainless Steel

Get a quoteView clamp details

OTX-4SCH262 specifications (replaces Breeze HTM 250)

Clamp Type Hi-Torque Hose Clamp
Application Heavy-Duty Hoses & Ducts
Clamping Range 1-3/4 in to 2-5/8 in (45–67 mm)
Hex Size 5/16 in
Torque Rating 150 in-lbs
SAE 262
Band Width 5/8 in
Band Material 301 Stainless Steel
Screw 410 Stainless Steel | 5/16 in hex
Sold As Each

Where the Breeze HTM 250 clamp is used

Hi-torque clamps use a heavier band and screw housing than a standard hose clamp, for high-pressure air, coolant and fuel lines on trucks and equipment. OTX-4SCH262 is used on heavy-duty hoses & ducts.

Other part numbers that match OTX-4SCH262

5 more OEM and aftermarket numbers cross to the same clamp. Any of them can be ordered as OTX-4SCH262.

NamePart NumberType
BreezeHTM 250Aftermarket
BreezeHTM250Aftermarket
Excoh4SCH262Aftermarket
Norma0156 0015 056Aftermarket
Norma1560015056Aftermarket
Norma01560015056Aftermarket

Ordering OTX-4SCH262

Quote requests for OTX-4SCH262 are answered within 24 hours. Tell us the quantity, and mention Breeze HTM 250 if you are replacing that number.

Questions about this number

Is OTX-4SCH262 the same as Breeze HTM 250?

Yes. OTX-4SCH262 matches Breeze HTM 250: clamping range 1-3/4 in to 2-5/8 in (45–67 mm), band width 5/8 in. If the hose has been changed since the old clamp was fitted, measure the hose outside diameter before ordering.

What size is the Breeze HTM 250 clamp?

Breeze HTM 250 fits 1-3/4 in to 2-5/8 in (45–67 mm). The band is 301 Stainless Steel.