Norma 01560015056 Cross Reference

OneTouch OTE-4SCH262 is a direct interchange for Norma 01560015056. Both are a hi-torque hose clamp with a clamping range of 1-3/4 in to 2-5/8 in (45–67 mm), so the clamp drops into the same position on the vehicle without changes to the hose or fitting.

OTE-4SCH262 specifications (replaces Norma 01560015056)

Clamp Type	Hi-Torque Hose Clamp
Application	Heavy-Duty Hoses & Ducts
Clamping Range	1-3/4 in to 2-5/8 in (45–67 mm)
Hex Size	5/16 in
Torque Rating	150 in-lbs
SAE	262
Band Width	5/8 in
Band Material	301 Stainless Steel
Screw	410 Stainless Steel | 5/16 in hex
Sold As	Each

Where the Norma 01560015056 clamp is used

Hi-torque clamps use a heavier band and screw housing than a standard hose clamp, for high-pressure air, coolant and fuel lines on trucks and equipment. OTE-4SCH262 is used on heavy-duty hoses & ducts.

Other part numbers that match OTE-4SCH262

5 more OEM and aftermarket numbers cross to the same clamp. Any of them can be ordered as OTE-4SCH262.

Ordering OTE-4SCH262

Quote requests for OTE-4SCH262 are answered within 24 hours. Tell us the quantity, and mention Norma 01560015056 if you are replacing that number.

Questions about this number

Is OTE-4SCH262 the same as Norma 01560015056?

Yes. OTE-4SCH262 matches Norma 01560015056: clamping range 1-3/4 in to 2-5/8 in (45–67 mm), band width 5/8 in. If the hose has been changed since the old clamp was fitted, measure the hose outside diameter before ordering.

What size is the Norma 01560015056 clamp?

Norma 01560015056 fits 1-3/4 in to 2-5/8 in (45–67 mm). The band is 301 Stainless Steel.