Excoh 4SCH262 Cross Reference

OneTouch OTX-4SCH262 is a direct interchange for Excoh 4SCH262. Both are a hi-torque hose clamp with a clamping range of 1-3/4 in to 2-5/8 in (45–67 mm), so the clamp drops into the same position on the vehicle without changes to the hose or fitting.

OTX-4SCH262 specifications (replaces Excoh 4SCH262)

Clamp Type	Hi-Torque Hose Clamp
Application	Heavy-Duty Hoses & Ducts
Clamping Range	1-3/4 in to 2-5/8 in (45–67 mm)
Hex Size	5/16 in
Torque Rating	150 in-lbs
SAE	262
Band Width	5/8 in
Band Material	301 Stainless Steel
Screw	410 Stainless Steel | 5/16 in hex
Sold As	Each

Where the Excoh 4SCH262 clamp is used

Hi-torque clamps use a heavier band and screw housing than a standard hose clamp, for high-pressure air, coolant and fuel lines on trucks and equipment. OTX-4SCH262 is used on heavy-duty hoses & ducts.

Other part numbers that match OTX-4SCH262

5 more OEM and aftermarket numbers cross to the same clamp. Any of them can be ordered as OTX-4SCH262.

Ordering OTX-4SCH262

Ask for a quote with the number 4SCH262 or OTX-4SCH262, plus your quantity. Small orders and full export cartons are both welcome, and we reply within 24 hours.

Questions about this number

Is OTX-4SCH262 the same as Excoh 4SCH262?

Yes. OTX-4SCH262 matches Excoh 4SCH262: clamping range 1-3/4 in to 2-5/8 in (45–67 mm), band width 5/8 in. If the hose has been changed since the old clamp was fitted, measure the hose outside diameter before ordering.

What size is the Excoh 4SCH262 clamp?

Excoh 4SCH262 fits 1-3/4 in to 2-5/8 in (45–67 mm). The band is 301 Stainless Steel.