Murray H600C Cross Reference

OneTouch OTX-4SC0006 is a direct interchange for Murray H600C. Both are a worm gear hose clamp with a clamping range of 7/16 in to 25/32 in (11–20 mm), so the clamp drops into the same position on the vehicle without changes to the hose or fitting.

OTX-4SC0006 specifications (replaces Murray H600C)

Clamp Type	Worm Gear Hose Clamp
Application	Coolant, Fuel & Air Hoses
Clamping Range	7/16 in to 25/32 in (11–20 mm)
Hex Size	5/16 in
Torque Rating	45 in-lbs
SAE	6
Band Width	1/2 in
Band Material	301 Stainless Steel
Screw	Zinc Plated Carbon Steel | 5/16 in hex
Sold As	Each

Where the Murray H600C clamp is used

Worm gear hose clamps are the everyday fix for coolant, fuel, air and vacuum hoses. They tighten with a screwdriver or nut driver and can be reused. OTX-4SC0006 is used on coolant, fuel & air hoses.

Other part numbers that match OTX-4SC0006

10 more OEM and aftermarket numbers cross to the same clamp. Any of them can be ordered as OTX-4SC0006.

Ordering OTX-4SC0006

Ask for a quote with the number H600C or OTX-4SC0006, plus your quantity. Small orders and full export cartons are both welcome, and we reply within 24 hours.

Questions about this number

Is OTX-4SC0006 the same as Murray H600C?

Yes. OTX-4SC0006 matches Murray H600C: clamping range 7/16 in to 25/32 in (11–20 mm), band width 1/2 in. If the hose has been changed since the old clamp was fitted, measure the hose outside diameter before ordering.

What size is the Murray H600C clamp?

Murray H600C fits 7/16 in to 25/32 in (11–20 mm). The band is 301 Stainless Steel.